Stair tool do not create landing

Anonymous · ‎2018-10-12

I am trying to create a stair and a landing, one way only, so very simple, but it si not possible. Once I made the flight the landing menu disappears and I can't create it.
Quite weird

Laszlo Nagy · ‎2018-10-14

Could you show screenshots of the situation? For example, the point where you see that you cannot create the Landing?

Loving Archicad since 1995 - Find Archicad Tips at x.com/laszlonagy
AMD Ryzen9 5900X CPU, 64 GB RAM 3600 MHz, Nvidia GTX 1060 6GB, 500 GB NVMe SSD
2x28" (2560x1440), Windows 10 PRO ENG, Ac20-Ac27

Lingwisyer · ‎2018-10-15

A stair and a landing? As in a landing at the top of a stair? You will have to make that with a slab or end with a tread and modify it's size.

Ling.

AC22-23 AUS 7000	Help Those Help You - Add a Signature
Self-taught, bend it till it breaks	Creating a Thread
Win11 \| i9 10850K \| 64GB \| RX6600	Win10 \| R5 2600 \| 16GB \| GTX1660

Anonymous · ‎2018-10-19

LaszloNagy wrote:
Could you show screenshots of the situation? For example, the point where you see that you cannot create the Landing?

Finally I made it work, but strangely creates an extra thread after placing the new landing.

Barry Kelly · ‎2018-10-22

As mentioned there is no need for a landing at the top - just end the stair with a riser (or you can end with a tread but you will have to hide lines) and the upper floor slab will be the landing.

Barry.

One of the forum moderators.
Versions 6.5 to 27
Dell XPS- i7-6700 @ 3.4Ghz, 16GB ram, GeForce GTX 960 (2GB), Windows 10
Lenovo Thinkpad - i7-1270P 2.20 GHz, 32GB RAM, Nvidia T550, Windows 11

Stair tool do not create landing

Still looking?

Browse more topics

See latest solutions

Start a new discussion!