Documentation
About Archicad's documenting tools, views, model filtering, layouts, publishing, etc.
SOLVED!

the edges of objects and slabs are broken

sara12
Contributor

hi,

in Archicad the edges of objects and slabs are broken. can someone help me solve this problem?

2 ACCEPTED SOLUTIONS

Accepted Solutions
Solution
mikas
Expert

Not sure, but are you possibly modelling too far from the origin?

If so, move the model closer, maybe it straightens out this way.

AC25, Rhino6/7+Grasshopper, TwinMotionMac Pro 6,1 E5-1650v2-3,5GHz/128GB/eGPU:6800XT/11.6.5 • HP Z4/Xeon W-2195/256GB/RX6800XT/W10ProWS

View solution in original post

Solution

There are only two possible reasons: Your GPU driver has gone bad and you need to update (very rarely the case).

Or you have modeled something very far from the origin (or modeled seperate things with a very big distance between them).

Possibly you have imported a DWG at some point? Those tend to sometimes generate geometry far away.

 

Please note that this goes for every view! Also independent worksheets.

Meaning you need to check the extent of every view.

After cleaning everything up you also need to close and reopen the file so Archicad can rearrange its internals.

Lucas Becker | AC 27 on Mac | Author of Runxel's Archicad Wiki | Editor at SelfGDL | Developer of the GDL plugin for Sublime Text |
«Furthermore, I consider that Carth... yearly releases must be destroyed»

View solution in original post

5 REPLIES 5
sara12
Contributor

image.jpgimage.jpg

Solution
mikas
Expert

Not sure, but are you possibly modelling too far from the origin?

If so, move the model closer, maybe it straightens out this way.

AC25, Rhino6/7+Grasshopper, TwinMotionMac Pro 6,1 E5-1650v2-3,5GHz/128GB/eGPU:6800XT/11.6.5 • HP Z4/Xeon W-2195/256GB/RX6800XT/W10ProWS

thank you so much for the answer

Solution

There are only two possible reasons: Your GPU driver has gone bad and you need to update (very rarely the case).

Or you have modeled something very far from the origin (or modeled seperate things with a very big distance between them).

Possibly you have imported a DWG at some point? Those tend to sometimes generate geometry far away.

 

Please note that this goes for every view! Also independent worksheets.

Meaning you need to check the extent of every view.

After cleaning everything up you also need to close and reopen the file so Archicad can rearrange its internals.

Lucas Becker | AC 27 on Mac | Author of Runxel's Archicad Wiki | Editor at SelfGDL | Developer of the GDL plugin for Sublime Text |
«Furthermore, I consider that Carth... yearly releases must be destroyed»
sara12
Contributor

thank you so much for the help