cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 
Documentation
About Archicad's documenting tools, views, model filtering, layouts, publishing, etc.

Forum Posts

Fill show incorrectly

I have been fighting Archicad for the last few weeks and think that it is winning! I used the fill tools to add 300x300mm tile fill on a working drawing I am doing. Used before in AC23 it showed correctly. Used here in AC24 it simply doesn't. Two iss...

KeesW by Advocate
  • 654 Views
  • 3 replies
  • 0 likes

Rotate Drawing Title on sheet

(Is there a limit to the amount of questions I can post per day?..... ) My drawing is rotated 270° to fit onto my sheet. The title of the drawing is now to the left of the sheet. Can I change that so the title is at the bottom of the drawing?

Keynotes using the change tool

After searching high and low for a workable keynote creation method in archicad, exasperated, I almost gave up. My last resort has been to use the change manager to add keynotes to my construction set of drawings, including elevations, sections and d...

Anonymous by Not applicable
  • 1369 Views
  • 6 replies
  • 0 likes

Resolved! North symbol: following project north

I seem to have 2 questions concerning project north. First: Placing a north symbol in the project map seems to work fine and correspond to the "follow project north" setting. This also works fine when the north symbol is placed on a Master layout. Bu...

Resolved! elevation markers don't have second line

Hello, for elevation marker in the floor plan, - one elevation line has "second line" which control the view distance, but - the orthers don't have and unable to adjust the view distance Please advice how to set the second lines back Thanks

Anonymous by Not applicable
  • 474 Views
  • 2 replies
  • 0 likes

Published PDF has wrong font size of the trace reference

Hi, I'm trying to publish a pdf with a trace reference of the story below, but the problem is that fonts (windows markers from the story below, also the lines) become huge on the pdf compared to the one I have in the drawing. Like they were in a wron...

Anonymous by Not applicable
  • 884 Views
  • 6 replies
  • 0 likes

Dimension Witnessline LineType

Hi all. Can the line type for the dimension witnessline be changed to a dashed line rather than a solid line? Thanks

Too Long by Enthusiast
  • 457 Views
  • 2 replies
  • 0 likes

JPG / Image quality in published PDFs

Hey all - I'm wondering if there's a setting to adjust the image quality in published pdfs? Currently I'm getting a lot of artifacts - the image below is at 100% zoom, Archicad generated view placed on a A3 Page.