Installation & update
About program installation and update, hardware, operating systems, setup, etc.

No Codemeter license information available

David Bearss
Booster
Woke up to this today. Upgraded and installed so long ago I have no idea where to go for this information. Can someone give me a refresh an what to do?

Kind of hard to accomplish anything in this state.

capture-20160326-161843.png
David Bearss
Archicad 18/Windows 11
Alienware 17 R5
i7 2.4 GHz / 16 GB ram
9 REPLIES 9
vistasp
Advisor
Not a very happy Easter for you David.

Looks like the system isn't reading your keyplug.

Shooting in the dark here but what I'd try is:
1. A different USB port
2. Uninstalling / reinstalling Codemeter drivers
3. Running the latest GS License Manager Tool
= v i s t a s p =
bT Square Peg
https://archicadstuff.blogspot.com
https://www.btsquarepeg.com
| AC 9-27 INT | Win11 | Ryzen 5700 | 32 GB | RTX 3050 |
David Bearss
Booster
vistasp
Thanks. #3 did it.
Question I have is what is a "GRAPHISOFT ID"?
Do I have one and if so how do I find out what it is? I would assume I have been chugging along here for a couple of years with no problems and have had no reason to interact with License Manager Tool and maybe I don't have a Graphisoft ID? Could that possibly be myarchicad.com ID?
thanks!
David Bearss
Archicad 18/Windows 11
Alienware 17 R5
i7 2.4 GHz / 16 GB ram
vistasp
Advisor
Glad it worked David.

Not 100% sure if the MyARCHICAD ID works or not. You could try the lost password method of determining if you already have an account. If you do, it will send a new password to your registered email ID. If you don't, it will complain that no such email ID is registered.
= v i s t a s p =
bT Square Peg
https://archicadstuff.blogspot.com
https://www.btsquarepeg.com
| AC 9-27 INT | Win11 | Ryzen 5700 | 32 GB | RTX 3050 |
Laszlo Nagy
Community Admin
Community Admin
GRAPHISOFT ID is basically one ID you can use on multiple GS sites like GRAPHISOFT.com, BIMcomponents.com, BIMx site, MyarchiCAD.com, I think even the beta site. Unfortunately, the list does not include ARCHICAD-Talk at this moment:

https://graphisoftid.graphisoft.com/#/login

It is the same idea as a Google ID, which also grants you access to a lot of Google Site.
I guess the future direction will be one GRAPHISOFT ID for all GRAPHISOFT sites so you need to keep track of one User Name/password.
Loving Archicad since 1995 - Find Archicad Tips at x.com/laszlonagy
AMD Ryzen9 5900X CPU, 64 GB RAM 3600 MHz, Nvidia GTX 1060 6GB, 500 GB NVMe SSD
2x28" (2560x1440), Windows 10 PRO ENG, Ac20-Ac27
vistasp
Advisor
laszlonagy wrote:
Unfortunately, the list does not include ARCHICAD-Talk at this moment:
I hope that doesn't happen... unless they stop requiring a fresh login every single day!
= v i s t a s p =
bT Square Peg
https://archicadstuff.blogspot.com
https://www.btsquarepeg.com
| AC 9-27 INT | Win11 | Ryzen 5700 | 32 GB | RTX 3050 |
Laszlo Nagy
Community Admin
Community Admin
Vistasp,

Do you mean you would like to stay logged into sites requiring Graphisoft ID?
Loving Archicad since 1995 - Find Archicad Tips at x.com/laszlonagy
AMD Ryzen9 5900X CPU, 64 GB RAM 3600 MHz, Nvidia GTX 1060 6GB, 500 GB NVMe SSD
2x28" (2560x1440), Windows 10 PRO ENG, Ac20-Ac27
vistasp
Advisor
That's right Laszlo. Here, on AC-talk, I'm logged in for months on end and I don't need to go through the extra step of logging in to reply to a post. The same is not the case on the GDL forum which uses the GRAPHISOFT ID. I have to admit, though, that most of the stuff there is out of my league so I hardly ever have something useful to contribute.

Still, if the same thing were to be required on this forum, it would be a bit of a pain.
= v i s t a s p =
bT Square Peg
https://archicadstuff.blogspot.com
https://www.btsquarepeg.com
| AC 9-27 INT | Win11 | Ryzen 5700 | 32 GB | RTX 3050 |
Barry Kelly
Moderator
I like the fact that with this forum you can tick the box to remember user name and password.
That way even if you do close it completely it will log in automatically when you re-open it.

Those sites with the Graphisoft ID don't have this option.
Silly thing is you can click in the user name and password fields and they will auto-populate and then you can login - so why not just remember the details and auto-login.
Just a couple of extra clicks but it is a bit frustrating to have to do it for every Graphisoft site - even when you have just logged in to one already.

Barry.
One of the forum moderators.
Versions 6.5 to 27
Dell XPS- i7-6700 @ 3.4Ghz, 16GB ram, GeForce GTX 960 (2GB), Windows 10
Lenovo Thinkpad - i7-1270P 2.20 GHz, 32GB RAM, Nvidia T550, Windows 11
Laszlo Nagy
Community Admin
Community Admin
I agree, keeping people logged in would be a useful addition to how the GRAPHISOFT ID works.
Loving Archicad since 1995 - Find Archicad Tips at x.com/laszlonagy
AMD Ryzen9 5900X CPU, 64 GB RAM 3600 MHz, Nvidia GTX 1060 6GB, 500 GB NVMe SSD
2x28" (2560x1440), Windows 10 PRO ENG, Ac20-Ac27