Modeling
About Archicad's design tools, element connections, modeling concepts, etc.
SOLVED!

Connection between beams with different widths

LeeJaeYoung
Virtuoso

 

LeeJaeYoung_1-1680262992933.png

I want to make sure there are no overhangs where the arrows are, but I think this is the best solution.
How are you doing?
LeeJaeYoung_2-1680263082520.png

in REVIT

If you do not combine with a disallow join in the revit and place it in the desired location, it is automatically combined.

LeeJaeYoung_3-1680263210704.png

 

 

AC27 on window 11
1 ACCEPTED SOLUTION

Accepted Solutions
Solution
Laszlo Nagy
Community Admin
Community Admin

Here is how you can achieve it:

BeamIntersection.png

Make sure that the Junction Order value for the two horizontal Beams is set to a higher number than for the two vertical Beams. That way, Archicad will first connect the two Horizontal Beams, then it will join the two vertical Beams after, resulting in the desired junction geometry.

BeamIntersection-2.png

Loving Archicad since 1995 - Find Archicad Tips at x.com/laszlonagy
AMD Ryzen9 5900X CPU, 64 GB RAM 3600 MHz, Nvidia GTX 1060 6GB, 500 GB NVMe SSD
2x28" (2560x1440), Windows 10 PRO ENG, Ac20-Ac27

View solution in original post

2 REPLIES 2
Solution
Laszlo Nagy
Community Admin
Community Admin

Here is how you can achieve it:

BeamIntersection.png

Make sure that the Junction Order value for the two horizontal Beams is set to a higher number than for the two vertical Beams. That way, Archicad will first connect the two Horizontal Beams, then it will join the two vertical Beams after, resulting in the desired junction geometry.

BeamIntersection-2.png

Loving Archicad since 1995 - Find Archicad Tips at x.com/laszlonagy
AMD Ryzen9 5900X CPU, 64 GB RAM 3600 MHz, Nvidia GTX 1060 6GB, 500 GB NVMe SSD
2x28" (2560x1440), Windows 10 PRO ENG, Ac20-Ac27

Thank you for your kind explanation.

AC27 on window 11