Modeling
About Archicad's design tools, element connections, modeling concepts, etc.
SOLVED!

Why can't the beam be blocked by the door in section?

LeeJaeYoung
Virtuoso

this is section

LeeJaeYoung_0-1658402411839.png

Why can't the beam be blocked by the door?
I copied the one on the right, but I can't see it

 

this is plan

LeeJaeYoung_1-1658402542065.png

 

this is  beam

LeeJaeYoung_0-1658402700119.png

 

 

 

this is section

LeeJaeYoung_0-1658403392989.png

 

AC27 on window 11
3 ACCEPTED SOLUTIONS

Accepted Solutions
Solution

1e.JPG

Andrii
AC 8.1 - 27 INT/POL 3001
Win11 | Ryzen 5600 | 16 GB | GTX 1650

View solution in original post

Solution

Maybe is better to assign a beam (with priority as you had before) to another layer and give this layer a higher priority, for example 2. Because the priority of layers is probably higher than intesection priority, But I am not sure if there will be a good connection between the insulation beam and the insulation wall, then you probably have to give all the insulation element to this layer.

Andrii
AC 8.1 - 27 INT/POL 3001
Win11 | Ryzen 5600 | 16 GB | GTX 1650

View solution in original post

Solution

2.JPG

 

But you just have to remember to do the update for the layer combination !!!

Andrii
AC 8.1 - 27 INT/POL 3001
Win11 | Ryzen 5600 | 16 GB | GTX 1650

View solution in original post

16 REPLIES 16
Andrii Levko
Expert

Building materials priority.  You have to give your beam the same or higher priority for building material than the wall.

Andrii
AC 8.1 - 27 INT/POL 3001
Win11 | Ryzen 5600 | 16 GB | GTX 1650

this is section

LeeJaeYoung_0-1658407227454.png

Then, how can I model the cross section like this?

AC27 on window 11

You have to give your beam the same or higher priority for building material than the wall.

In main menu choose Options/Element Attributes/Building materials,  you can find there "Intersection priority" and give for building material of beam  higher priority then building material of the wall.

Andrii
AC 8.1 - 27 INT/POL 3001
Win11 | Ryzen 5600 | 16 GB | GTX 1650
Solution

1e.JPG

Andrii
AC 8.1 - 27 INT/POL 3001
Win11 | Ryzen 5600 | 16 GB | GTX 1650

Thank you so much ^^

Insulation does not need to be combined
The plasterboard and other materials above must be combined.

AC27 on window 11

I just give you the answer, you can just check if it works or not.

And to combine or not, you have to decide for yourself.

 

But you can always duplicate building material using it for special cases such as you have with this beam.

Andrii
AC 8.1 - 27 INT/POL 3001
Win11 | Ryzen 5600 | 16 GB | GTX 1650

Because the beam is invisible by intersection priority.

Andrii
AC 8.1 - 27 INT/POL 3001
Win11 | Ryzen 5600 | 16 GB | GTX 1650
Andrii Levko
Expert

As an option, you can assign a beam to another layer and give this layer a higher priority, for example 2. Because the priority of layers is probably higher than intesection priority

Andrii
AC 8.1 - 27 INT/POL 3001
Win11 | Ryzen 5600 | 16 GB | GTX 1650

thank you so much

The plasterboard and other materials above must be combined.

LeeJaeYoung_0-1658409472619.png

If it were you, how would you make it?
I am a beginner.

 

AC27 on window 11