cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 
Modeling
About Archicad's design tools, element connections, modeling concepts, etc.

Forum Posts

Trace Reference disapears inbetween panning

I can only see my trace reference when i pan with the middle mouse button. When i release the middle mouse button the trace reference disappears as if it was not turned on. I could do with the ref remaining on while i work from it.. Any ideas? Ive tr...

Anonymous by Not applicable
  • 1365 Views
  • 2 replies
  • 0 likes

Problems Plotting Gradient Fill and % fill

Anyone please help, I have a deadline to get these planning drawings in. I have used both the above fills, on the plans and elevations. When I print to our A3 printer the fills come out fine but when I print to our Plotter the gradient fill changes f...

Anonymous by Not applicable
  • 1755 Views
  • 3 replies
  • 0 likes

Workspace not Trace & Referencing to SAME coord. as Plan

Hi, I can not get a drawing located at a specific coordinate in Workspace window, once Trace & Referenced, to the SAME coordinate as Plan window. Is there a way to get it to automatically go to the same coordinate like Plan Trace & Referenced to Plan...

Anonymous by Not applicable
  • 7707 Views
  • 12 replies
  • 0 likes

Joining symbolic lines at corners

Why is there a difference between using a fill and a polyline, in how they join at the corners when using a symbolic linetype? Surely they they should work the same way? The polyline (on the right) automatically joins, but the fill (on the left) does...

Anonymous by Not applicable
  • 1151 Views
  • 0 replies
  • 0 likes

Problems With Elevator Settings

Could someone please help me out with the story height settings in the elevator object? Is there an option that allows me to change the floor to floor height..and consequently where the doors of the elevator appear. As at the moment i have doors inbe...

Anonymous by Not applicable
  • 1470 Views
  • 2 replies
  • 0 likes

3 DOUBTS ABOUT AC 11

I JUST STARTED TO WORK WITH AC 11. COULD SOMEONE HELP ABOUT THE FOLLOWING DOUBTS ?? 1 - WHERE CAN I FIND GDL TOOLBOX FOR AC11 ? IT IS A VERY HELPFULL GDL EDITOR. I TRIED WWW.ARCHIDATA.HU WITHOUT SUCCESS. DISCOUNTINUED ???? 2- THE 3D NAVIGATION PALLET...

Anonymous by Not applicable
  • 6363 Views
  • 11 replies
  • 0 likes

Complex slab

I am confronted with modelling a concrete slab where the top surface is of a given slope and the bottom (soffit) is a different slope, thus creating a slab of variable thickness Obviously, the slab tool does not work; the mesh tool would be useful fo...

!Restored: Archicad 11 for Vista 64 bit

Hello everyone! I hope you guys can help me on this one. We have a Gateway tower with a dual core 64 processor running Vista 64 Ultimate. Now when I take a look at the processes I see Archicad.exe *32. This leads me to believe that the software is ru...

Anonymous by Not applicable
  • 11442 Views
  • 12 replies
  • 0 likes

Composite Wall / Beams representation problems

I have a custom wall composite w/ stucco, masonry, insulation & drywall with the following priorities respectively 6, 8, 6 & 4. My Beams are w/ priority set to 5. The problem is in section the beam doesn't shows up. If I higher the beam priority then...

a.jpg
Anonymous by Not applicable
  • 1519 Views
  • 3 replies
  • 0 likes

help with personalized door panel

Hi i just have updated archicad 10 to version 11 , i have tried to do a personalized door or window panel , but it doesnt work , shows an info box , with doesnt exist an apropiate subtype container in the gdl objects loaded to can activate this funct...

Anonymous by Not applicable
  • 1344 Views
  • 2 replies
  • 0 likes