cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 
Modeling
About Archicad's design tools, element connections, modeling concepts, etc.

Forum Posts

Question about a door reveal

How I make this door reveal seamless? The point is I cannot do it through the door settings and the only way I came up with is to do it by adding extra walls but since it's a door opening the extra pieces of wall cannot be intersected seamlessly.

Anonymous by Not applicable
  • 540 Views
  • 4 replies
  • 0 likes

Legacy Preference

Hi guys. I work it a small business whos archicad template was built in AC13 and never developed for the following releases but rather just opened in the new version of archicad and saved. The issue I have is with the Legacy feature. When the legacy ...

Too Long by Enthusiast
  • 2115 Views
  • 22 replies
  • 0 likes

Light and heavy floor slabs

I've drawn a section through a building including 2 floor slabs, They were drawn at the same time, using the same settings, lines, etc. Yet one is heavy and the other is light. Why?

KeesW by Advocate
  • 318 Views
  • 1 replies
  • 0 likes

complex profile for wall

Hello I need guidelines in the wall modeling process. Here is the segment of a wall. In the first part, I need to apply Tiles on one side of the wall. In the 2nd Part, there are Tiles on both sides of the wall. In the 3rd part, there are tiles finish...

Anonymous by Not applicable
  • 474 Views
  • 2 replies
  • 0 likes

Resolved! Selecting area text for multiple fills

Hi, I've got around 100 fills that all have a very light shade of area text that is no longer showing up above my fills. So, I would like to select the area text of all these fills and change the colour to something darker. How do I do this without s...

Anonymous by Not applicable
  • 909 Views
  • 2 replies
  • 0 likes

Misaligned textures in complex wall assemblies

Hi, I have a wall assembly repeated on multiple walls. Most of them will join just fine, but at one corner, the edge of my outer material has its texture misaligned. This shows up as a thin strip of texture that is off. I checked the junction order o...

Marquee Selection and then show on 3D not working right

Hello! I hope all the graphisoft community is keeping covid-free. I have a question about a weird Archicad mystery. On a specific file I select an area with a marquee and press F5 to see the selected in 3D. Instead of just the selection I see the who...

Anonymous by Not applicable
  • 700 Views
  • 2 replies
  • 1 likes

corner stair

Hi, any idea how to do corner stair type using stair tool? Thanks

Anonymous by Not applicable
  • 1051 Views
  • 4 replies
  • 0 likes

Custom Stair editing

I need to make a stair where the bottom part of the landing is wider than the top - There is no standard stair option for this right? So because I need to create a custom stair for it, why is it that I can't edit the length of the stair ? And why is ...

dhnguyen by Contributor
  • 676 Views
  • 2 replies
  • 0 likes