cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 
Modeling
About Archicad's design tools, element connections, modeling concepts, etc.

Forum Posts

Rustication only to specific height

Hi, I work on ac 18 (also 23 on another computer) Is it possible to create rustication on walls (or maybe timber) only to specific height on the wall? My building is made from walls that go all the way up to 14meters, there are no separate walls on e...

Anonymous by Not applicable
  • 864 Views
  • 5 replies
  • 0 likes

AC 23 Polyline bug (Adjust command)

Well, let me juct copy paste a post from AC 21, seems like the same thing happened again. Graphisoft please give us new bugs, don't repeat the old ones! Is is just me or the polylines in AC 23 do not work properly with the "adjust" command? They will...

Intersection Priority for a Wall, when Attached to another wall

If I have a corner where three walls meet, on the left side, I'm able to solve the intersection priority, but if I have this single wall just attaching to a middle of a wall, then what can I do to make it intersect correctly, like the one on the left...

Anonymous by Not applicable
  • 650 Views
  • 3 replies
  • 0 likes

Display Order issue with columns and walls.

Hi, am new here but have lurked for a long while, thanks for the help! So I have a plan where my columns are stacked below my partition walls and no amount of display order tinkering can get them on top, I understand that these elements are of the sa...

Resolved! PBC and Door/Window Issue

Hi Folks, I'm facing an inconsistensy within the PBC (Priority Based Connection) concept... - I have a door opening on a wall based under the finish floor; - My floor finish cross this door. The logic behavior would dictate that if the floor was cros...

Anonymous by Not applicable
  • 2550 Views
  • 13 replies
  • 0 likes

Resolved! Roof at round corner and windows problem

Hi guys, I have two problems: a) how can I make a roof that would fit to my round corner hole ? (in the picture below). I think I can't do it in any way, or just don't know how... b) there is many windows in this building and I need to have them with...

Anonymous by Not applicable
  • 1202 Views
  • 4 replies
  • 0 likes

IFC Export, Building Material Not Found

I get a ton of these messages when exporting to IFC I don't see a way to identify which building material it's talking about? Building Material not found at line 6 in the 3D script of file Tread 21.gsm. (TREAD-061) Building Material not found at line...

Anonymous by Not applicable
  • 718 Views
  • 7 replies
  • 0 likes

Complex profile symbolic cut and textures

Hello. I just started using complex profiles to model brick walls with some variation in depth or roof crowns and have a few questions I haven't been able to find the answer to. First, is it possible somehow to make complex profile walls show as symb...

Top Sloped Walls

is there a way without solid operations/ complex profiles or morphs to make a wall with a sloped top? i have a bunch of wall fences laid out on an uneven terrain, so in order to control the height at specific points the top needs to be adjustable. Co...

Anonymous by Not applicable
  • 1671 Views
  • 10 replies
  • 0 likes