Beam display settings

samthornegroup · ‎2024-11-07

Hi.

Is is possible to change the display of a beam in plan view so that when it is set to an axis it still only displays as if it was upright?

So only the beams thickness is showing but the beam can remain modelled on an angle.

I have attached an image to help explain. The beam on the right is set to a 25° angle so it displays like it is but I would like it to display like the beam on the left.

Thank you.

Operating system used: Windows

Lingwisyer · ‎2024-11-08

Just curious at why you would want it to appear narrower? Sounds like a collision waiting to happen...

AC22-23 AUS 7000	Help Those Help You - Add a Signature
Self-taught, bend it till it breaks	Creating a Thread
Win11 \| i9 10850K \| 64GB \| RX6600	Win10 \| R5 2600 \| 16GB \| GTX1660

Barry Kelly · ‎2024-11-08

You can show just the axis (Model View Option setting).

Barry.

One of the forum moderators.
Versions 6.5 to 27
i7-10700 @ 2.9Ghz, 32GB ram, GeForce RTX 2060 (6GB), Windows 10
Lenovo Thinkpad - i7-1270P 2.20 GHz, 32GB RAM, Nvidia T550, Windows 11

Beam display settings

Setup info provided by author

Still looking?

Browse more topics

See latest solutions

Start a new discussion!