Global Settings Affecting Zone Data and Display

Andor Szoke
Graphisoft Alumni
Graphisoft Alumni

Options->Project Preferences->Zones Dialog

wp-content_uploads_2011_07_01-project-pref.png

Zone Instance Setting affecting Zone Data

Zone Settings Dialog –> Name and Positioning panel

wp-content_uploads_2011_07_02-zone-settings.png

Zone Settings->Area Calculation panel

wp-content_uploads_2011_07_03-zone-settings.png

Other Element’s Instance Setting affecting Zone Data

Wall Settings Dialog->Geometry and Positioning panel

wp-content_uploads_2011_07_04-wall-settings.png

Wall/Column Settings Dialog->Model panel->Relation to Zones drop-down list

wp-content_uploads_2011_07_05-wall-settings.png

Fill Settings Dialog->General Settings panel->Subtract from Zones checkbox

wp-content_uploads_2011_07_06-fill-settings.png

Line/Arc/Circle/Polyline/Spline Settings Dialog->General Settings panel->Zone Boundary checkbox

wp-content_uploads_2011_07_07-line-settings.png

Actions affecting Zone Data

Design->Crop Zone Dialog

wp-content_uploads_2011_07_08-crop-zones.png

Design->Solid Element Operations performed on Zones

wp-content_uploads_2011_07_09-SEO.png

Elements’ Geometry affecting Zone Data

Zone 3D shape and behavior affected by Slanted Walls/Columns/Beams etc.

Position of Zone Reference Point

  • If you place the Zone Stamp with one of the automatic recognition methods, you will see a cross appear inside the Zone at the location that you first clicked to define the Zone’s area. This cross indicates the reference point of the Zone. This point is used as the starting point of boundary recognition for subsequent updating actions.

Global Setting affecting Zones’ View

Options->Project Preferences->Dimensions/Calculation Units & Rules Dialog

wp-content_uploads_2011_07_10-calc-units.png

Zone Stamp Library Parts and their parameters

wp-content_uploads_2011_07_11-parameters.png

Options->Element Attributes->Zone Categories

wp-content_uploads_2011_07_12-zone-categ.png

Document->Model View->Model View Options->Options for Construction Elements panel->Zone options->Show Zone Stamp checkbox

wp-content_uploads_2011_07_13-MVO.png

View->Elements in 3D View->Filter and Cut Elements in 3D Dialog->Element Types to Show in 3D field

wp-content_uploads_2011_07_15-filter.png

Actions affecting Zones’ View

Design->Update Zones Dialog - Update of Zones depending on how GDL is written

wp-content_uploads_2011_07_14-update.png

Still looking?

Browse more articles

Back to articles

See latest solutions

Accepted solutions

Start a new discussion!