Wishes
Post your wishes about Graphisoft products: Archicad, BIMx, BIMcloud, and DDScad.

Section/Elevation Tool

Anonymous
Not applicable
Hi everyone

At present, the section/elevation tool is one that has greatly consistuted towards automating the whole 3D "drafting" experience. Well at least for me.

The line representing the cutting plane does not necessarily have to be a straight one. However, it would also be really helpful if the line representing the depth of view of the section/elevation (representing the horizontal range) can also be broken into segments, allowing the user to determine the depth of view at different areas?

Shawn
12 REPLIES 12
Laszlo Nagy
Community Admin
Community Admin
For this I would create separate Sections then I would place them next to each other on the Layout so the printed result will be what you want.
Loving Archicad since 1995 - Find Archicad Tips at x.com/laszlonagy
AMD Ryzen9 5900X CPU, 64 GB RAM 3600 MHz, Nvidia GTX 1060 6GB, 500 GB NVMe SSD
2x28" (2560x1440), Windows 10 PRO ENG, Ac20-Ac27
owen
Newcomer
don't forget to vote over at Section/Elevation based on curve as well ... elevations are being drawn in 2D!!

.. and who voted Not Important??
cheers,

Owen Sharp

Design Technology Manager
fjmt | francis-jones morehen thorp

iMac 27" i7 2.93Ghz | 32GB RAM | OS 10.10 | Since AC5
Anonymous
Not applicable
I would also like to be able to change the distant area limit in each floor independently of each other.