About aarkell

aarkell · 2023-11-03

Does anyone know how to avoid the bold line where minimal space extends beyond a wall, without modifying the cut line of the wall? This is generally just an issue where there is no wall, hence not a need for the cut line, per the attached image. I kn...

aarkell · 2022-09-27

Does anyone know a good way to allow objects made with LPM in AC25 to auto update once changes are made to the object. We have an office library with custom objects on our BIMcloud, and I made some slight changes to a few and thought when the library...

aarkell · 2022-07-18

Hello, Our office does quite a bit of multifamily residential work with accessible needs, and thus we often use custom objects that are saved out from different configurations of the native Archicad toilet or tub with grab bar objects, since the toil...

aarkell

I'd probably do the same and should have stressed the usefulness of the Opening tool in my original response. Although using a door opening is a viable solution and probably the better workaround before the Opening tool was introduced, using an openi...

aarkell

I don't believe anything has changed. You select the beam, click the node you want to stretch, and when you hold down shift key the distance value in your tracker should switch to zero. Still holding the shift key you can then press tab and enter the...

aarkell

Oops. I told you empty door opening, but if you use "Rectangular Door Opening" it won't have any trim.

aarkell

Are you trying to stretch the ends in plan? If so, you can click on an end node of a beam and before dragging hold down shift and it should give you the option to then type in the additional value you want it to stretch.

aarkell

When you activate the door or opening tool to place in concrete wall, you should be able to hover over log wall and use the TAB key to cycle through overlapped elements. This is assuming the concrete wall is also visible in plan just hidden by the lo...

User Statistics

User activity

Minimal Space Line at Walls

Updating Objects Made with Library Part Maker

Minimal Space for Custom Objects

Re: Doors

Re: Stretch Relative/Absolute

Re: Doors

Re: Stretch Relative/Absolute

Re: Doors