I`d like to transform numeric nodes like this (i got them with drag&drop method):
105:
pnum=39
PUT 0, 0, 0
PUT 0.0392795, 0, 0
PUT 0.0392795, 0.1095692, 1
PUT 0.0392437, 0.1147646, 1
PUT 0.0396736, 0.1194417, 1
PUT 0.0405131, 0.1236261, 1
PUT 0.0417058, 0.1273432, 1
PUT 0.0431956, 0.1306186, 1
PUT 0.044926, 0.1334777, 1
PUT 0.046841, 0.1359461, 1
PUT 0.0488839, 0.138049, 1
PUT 0.050999, 0.1398123, 1
PUT 0.0531295, 0.1412612, 1
PUT 0.0552194, 0.1424213, 1
PUT 0.0572122, 0.1433178, 1
PUT 0.059052, 0.1439767, 1
PUT 0.0606822, 0.1444231, 1
PUT 0.0620467, 0.1446826, 1
PUT 0.063089, 0.1447805, 0
PUT 0.0631363, 0.1625932, 0
PUT 0.0658582, 0.1626122, 1
PUT 0.0682747, 0.1628674, 1
PUT 0.0704037, 0.1633422, 1
PUT 0.0722628, 0.1640205, 1
PUT 0.0738701, 0.1648855, 1
PUT 0.075243, 0.1659213, 1
PUT 0.0763995, 0.1671112, 1
PUT 0.0773573, 0.1684392, 1
PUT 0.0781343, 0.1698884, 1
PUT 0.0787481, 0.171443, 1
PUT 0.0792166, 0.1730863, 1
PUT 0.0795574, 0.1748022, 1
PUT 0.0797885, 0.1765741, 1
PUT 0.0799274, 0.1783858, 1
PUT 0.0799921, 0.1802208, 1
PUT 0.0800001, 0.182063, 1
PUT 0.0800001, 0.25, 0
PUT 2.739999999998E-005, 0.25, 0
PUT 0, 0, 0
to parametric nodes similiar to this (its taken from archicad moulding library):
105:
pnum=15
PUT 0, 0, 0
PUT 0, zzyzx*13/67, 0
PUT b*1/8.5, zzyzx*14/67, 0
PUT b*1/8.5, zzyzx*56/67, 0
PUT 0, zzyzx*57/67, 0
PUT 0, zzyzx, 0
PUT b*3/8.5, zzyzx, 0
PUT b*4/8.5, zzyzx*65/67, 1
PUT b*3.9/8.5, zzyzx*63.75/67, 1001
PUT b*3.55/8.5, zzyzx*62.73/67, 1001
PUT b*5/8.5, zzyzx*59/67, 1001
PUT b*8/8.5, zzyzx*53/67, 1001
PUT b*5.5/8.5, zzyzx*49/67, 1000
PUT b, zzyzx*49/67, 0
PUT b, 0, 0
I need to do this because i want my mouldings to be resizable.
the shape must be same.
thanks in advance for any tips.
