cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 
Documentation
About Archicad's documenting tools, views, model filtering, layouts, publishing, etc.

Forum Posts

A question about the GOC.

I want to express the lower wall in the structural drawing.But since I'm trying to designate it as HOME STORY, it seems like I have to make it all by floor. It doesn't seem right.Isn't there a condition of a lower floor wall? I want to change the wal...

LeeJaeYoung_0-1685362684634.png LeeJaeYoung_0-1685369285043.png

Export Elevation to MOD - Elements going missing

Hi all So having a bit of trouble with my MOD files. My plan is to export the elevations as MOD files, place them as a hotlink on a Worksheet, mirror them and finally place on a Layout. (Standard house needs mirroring.)The problem is when I place the...

Why can't only the core find the boundary?

Why can't only the core find the boundary?I would like to be able to create a boundary in a visible state.This is a problem that occurs during Export, which was asked before, and it seems that it is really difficult to specify the border line because...

LeeJaeYoung_0-1685288573997.png

How do I do a wipeout under the window when exporting?

What should I do with the bottom of the window?From my point of view, it only believes in the function called WIPEOUT and does not calculate the relationship with the wall at all.I think you should consider the FILL area with the wall once. in archic...

LeeJaeYoung_1-1685276351614.png LeeJaeYoung_0-1685276313646.png

Line issue

Hello, I have a problem when drawing a straight line whenever I write a number then press enter the line doesn’t go straight instead it goes up or diagnol. It also show negative and positive which never happened before. When I write zero it go straig...

R30 by Participant
  • 64 Views
  • 2 replies
  • 0 likes

Resolved! Lines and text not appearing on master layout

I am not able to place text or other 2-D elements on the master layout. The text block will show up, but way off the page. I can not get it to be on the page. The same happens when I try to draw lines. I also tried creating a new master layout and th...

Brockway by Participant
  • 77 Views
  • 2 replies
  • 0 likes

2D Workplace from 3D Cutaway

Hi,I am fairly new in Archicad and I am not able to get what (I think) it's a easy result:I would like to extract to a 2D workplace the section shown by the 3D cutaway.I have checked a couple of tutorial and posts, but I cannot get a new 2D workplace...

2023-05-26 10_02_02-li211_pl_230523_WienStadioncenter+IFC - ARCHICAD 25 - __Remote.png 2023-05-26 10_04_01-li211_pl_230523_WienStadioncenter+IFC - ARCHICAD 25 - __Remote.png 2023-05-26 10_04_50-li211_pl_230523_WienStadioncenter+IFC - ARCHICAD 25 - __Remote.png
lcdega by Participant
  • 103 Views
  • 2 replies
  • 0 likes

Moving fill handle when handle is on node

I have a slab with a cover fill. I want to move the fill origin using the fill handle, but when the handle is located on top of a node, the option to move it doesn't appear in the pet palette. The best workaround I've found is to move the node, grab ...