Library Door with fixed part

[Jose Gradoli]

Hi, 

First of all sorry if the question is not understandable, because I want to draw a door like the one attached in the post which has a "tarja" (fixed part in the upper side of the door), but there's nothing similar in the AC Library..

¿Is there any door or object similar to the one I want in the library?

[Rubia Torres · Accepted solution]

Hi Jose,

You can achieve the desired result by setting the object "Door with Transom". Please check the screenshots below (from Archicad 26). Hope they will help you 😉

Cheers,

[Jose Gradoli]

Hi,

Thanks a lot for your answer. I'm still in AC25 waiting AC26 ARM SPA, but the door library object is the same in AC25 and 26. 

The solution is 90 % suitable but it still appears a frame between the higher and lower part of the door.

I replied your instructions in AC25 and 26 and the frame is still there

In any case it's much more useful than the way I was drawing those doors.

Thanks again

    

[Mahmoud Qenawi]

AS @Rubia Torres has said, only i add few things as a workaround to achieve your targeted door, by adjusting the working units to be (0,0000) 4 numbers tolerance then adjust Transom frame width in Frame style & Dimensions panel to be ( 0.0001 m in my case ) then you can retrieve your default working units it will appear as 0 value: