cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 
2024 Technology Preview Program

2024 Technology Preview Program:
Master powerful new features and shape the latest BIM-enabled innovations

Libraries & objects
About Archicad and BIMcloud libraries, their management and migration, objects and other library parts, etc.
SOLVED!

Depiction of gates over two floors

Nina_B
Contributor

Hello Graphisoft community,

 

For larger industrial projects, we have high gates, which we would like to see on the ground floor and in the floor plans above. In one project we have an approx. 80 cm high base and a sandwich wall above it. The gate is drawn in the base and there is an opening in the sandwich wall. Normally, when I cut the upper floor, I only see the sandwich wall and the base as a plan view. So far, my workaround has been to only raise the base in the goal area, which is actually wrong from a structural point of view. Is there a better solution for this?


opening_sandwich_wall.jpggroundfloor.jpgfirstfloor.jpg
section_base_sandwichwall.jpg
1 ACCEPTED SOLUTION

Accepted Solutions
Solution
Lingwisyer
Guru

Please place your images inline rather than as attachments... It's hard to follow when you need to keep opening different images...

 

Why not use a Complex Wall?

 

Either way, I would put the door in the sandwich wall and set the wall to show on All Relevant Stories.

 

"raise the base in the goal area"

 

I do not get what you mean here...

AC22-23 AUS 7000Help Those Help You - Add a Signature
Self-taught, bend it till it breaksCreating a Thread
Win11 | i9 10850K | 64GB | RX6600 Win10 | R5 2600 | 16GB | GTX1660

View solution in original post

3 REPLIES 3

If I can ask you why you use opening while you already placing a door?

AC 27 INT 5030/WIN 11
AMD Ryzen 7 5800H with Radeon Graphics 3.20 GHz 16.0 GB
Solution
Lingwisyer
Guru

Please place your images inline rather than as attachments... It's hard to follow when you need to keep opening different images...

 

Why not use a Complex Wall?

 

Either way, I would put the door in the sandwich wall and set the wall to show on All Relevant Stories.

 

"raise the base in the goal area"

 

I do not get what you mean here...

AC22-23 AUS 7000Help Those Help You - Add a Signature
Self-taught, bend it till it breaksCreating a Thread
Win11 | i9 10850K | 64GB | RX6600 Win10 | R5 2600 | 16GB | GTX1660

Thanks for the suggestion with the complex wall. I will try it and hope that it works from the presentation. Otherwise I don't see any other solution at the moment. In the future I will also embed the images directly. 😉

Didn't find the answer?

Check other topics in this Forum

Back to Forum

Read the latest accepted solutions!

Accepted Solutions

Start a new conversation!