SOLVED!
Parallel Chords 1 Archicad 21
Anonymous
Not applicable
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
‎2020-03-24 04:58 PM
‎2020-03-24
04:58 PM
Solved! Go to Solution.
1 ACCEPTED SOLUTION
Accepted Solutions
Solution
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
‎2020-03-25 02:12 PM
‎2020-03-25
02:12 PM
PBI Rookie:
The interface on my computer is a bit different than yours, but try this: at the top of the Steel Joist Settings panel is the parameter "Type of Steel Joist". Change this from "K" to "Custom", then you should be able to set the length to any value.
You should add a Signature to your Profile (click the Profile button near the top of this page) with your ArchiCAD version and operating system (see mine for an example) for more accurate help in this forum.
David
The interface on my computer is a bit different than yours, but try this: at the top of the Steel Joist Settings panel is the parameter "Type of Steel Joist". Change this from "K" to "Custom", then you should be able to set the length to any value.
You should add a Signature to your Profile (click the Profile button near the top of this page) with your ArchiCAD version and operating system (see mine for an example) for more accurate help in this forum.
David
David Maudlin / Architect
www.davidmaudlin.com
Digital Architecture
AC27 USA • iMac 27" 4.0GHz Quad-core i7 OSX11 | 24 gb ram • MacBook Pro M3 Pro | 36 gb ram OSX14
www.davidmaudlin.com
Digital Architecture
AC27 USA • iMac 27" 4.0GHz Quad-core i7 OSX11 | 24 gb ram • MacBook Pro M3 Pro | 36 gb ram OSX14
1 REPLY 1
Solution
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
‎2020-03-25 02:12 PM
‎2020-03-25
02:12 PM
PBI Rookie:
The interface on my computer is a bit different than yours, but try this: at the top of the Steel Joist Settings panel is the parameter "Type of Steel Joist". Change this from "K" to "Custom", then you should be able to set the length to any value.
You should add a Signature to your Profile (click the Profile button near the top of this page) with your ArchiCAD version and operating system (see mine for an example) for more accurate help in this forum.
David
The interface on my computer is a bit different than yours, but try this: at the top of the Steel Joist Settings panel is the parameter "Type of Steel Joist". Change this from "K" to "Custom", then you should be able to set the length to any value.
You should add a Signature to your Profile (click the Profile button near the top of this page) with your ArchiCAD version and operating system (see mine for an example) for more accurate help in this forum.
David
David Maudlin / Architect
www.davidmaudlin.com
Digital Architecture
AC27 USA • iMac 27" 4.0GHz Quad-core i7 OSX11 | 24 gb ram • MacBook Pro M3 Pro | 36 gb ram OSX14
www.davidmaudlin.com
Digital Architecture
AC27 USA • iMac 27" 4.0GHz Quad-core i7 OSX11 | 24 gb ram • MacBook Pro M3 Pro | 36 gb ram OSX14