cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 
Modeling
About Archicad's design tools, element connections, modeling concepts, etc.
SOLVED!

Control zone stamp rotation point

PVBergkrantz
Expert
Hello. I'm working with zone stamps in different modules hotlinked to one file for layouts, and would like that some of the zones always rotate to be 0 deg, which is easily achieved by ticking the "fixed" checkbox in the zone settings. However the rotation is not around the text itself, rather around some point on the zone. In some cases I have moved the zone stamp to the side of the zone, and would like it to remain there but rotate around its own axis, so as to not change position but just rotation. Is this possible?

See attached screenshots.
| AC 25 Int | Win10 | i7-7800X | 32 GB | GeForce RTX 2060 6GB |

1 ACCEPTED SOLUTION

Accepted Solutions
Solution
PVBergkrantz
Expert
I found out this is because someone had moved the stamp using the "Move node" instead of "Move sub-element". The latter moves the anchor for both rotating and scaling in different scales.
| AC 25 Int | Win10 | i7-7800X | 32 GB | GeForce RTX 2060 6GB |

View solution in original post

2 REPLIES 2
Solution
PVBergkrantz
Expert
I found out this is because someone had moved the stamp using the "Move node" instead of "Move sub-element". The latter moves the anchor for both rotating and scaling in different scales.
| AC 25 Int | Win10 | i7-7800X | 32 GB | GeForce RTX 2060 6GB |

Barry Kelly
Moderator
Thanks for posting back with the solution.

Barry.
One of the forum moderators.
Versions 6.5 to 27
i7-10700 @ 2.9Ghz, 32GB ram, GeForce RTX 2060 (6GB), Windows 10
Lenovo Thinkpad - i7-1270P 2.20 GHz, 32GB RAM, Nvidia T550, Windows 11