Interior Elevations - walls "disappear"

[Anonymous]

I've placed interior elevations (v.11) into my model and most work fine but out of 12, there are two that do not display a wall that is right in front of them, but it's as though the wall weren't there - it shows what's behind the wall.

I've tried moving the IE marker and limit lines, I tried placing it individually and as a group. I've cut and pasted the wall, deleted it and put in a new wall and always with the same result. The wall displays fine in 3D or in section.

Naturally this is for a deadline that's today which I'm obviously going to miss....

The first image is the plan and marker, the second is the elevation I get.

Any help much appreciated!!!

thanks

[Anonymous]

the result - it just occurred to me that it's not displaying ANY of the walls - the windows in the background are off to the lower right on the plan above, but of course it is showing the little hooks on the wall

[Link]

Maybe it's because of this setting....

Cheers,
Link.

[Anonymous]

We had this problem in our office too- we found that that setting was the solution as well.

I find that when you are having a problem , and you can't figure it out- try every setting in the dialgue box and you will find it.

The answers are almost allways right in front of your eyes.

[Anonymous]

THANK YOU!!!!

That was it, as you said Jess, right in front of my eyes. I'm not sure why anyone would use it that way, but I'm sure there's a good reason.

I now have hope of not falling too far behind my deadline

[Anonymous]

AAAAAAHHHH! Thank You! I was having this same problem and it was making me a little crazy! I probably wasted an hour trying to figure it out yesterday.

[Anonymous]

cesarzlu wrote:
AAAAAAHHHH! Thank You! I was having this same problem and it was making me a little crazy! I probably wasted an hour trying to figure it out yesterday.

Same here...