cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 
Collaboration with other software
About model and data exchange with 3rd party solutions: Revit, Solibri, dRofus, Bluebeam, structural analysis solutions, and IFC, BCF and DXF/DWG-based exchange, etc.
SOLVED!

Window schedule showing doors and walls

Anonymous
Not applicable
I just made a window schedule, but for some reason the schedule contains not only the windows (as specified) but also doors and some walls.

The only element I've specified in the settings is the windows. I've even tried to specifically make the schedule to not show doors, but for some reason they are still visible in the schedule.

The doors shown in the schedule are on the layers chosen in the settings, but they are door elements (not just wrongly labeled as such or similar). The doors do have glass panes in them, but this shouldn't affect their inclusion in the schedule since their element type is still door.

See screenshots for settings and schedule. Any advice?


1 ACCEPTED SOLUTION

Accepted Solutions
Solution
Barry Kelly
Moderator
If you don't want doors there is no need for a criteria to not include them.
The group of layers needs to be contained in brackets as well.

Barry.
One of the forum moderators.
Versions 6.5 to 27
i7-10700 @ 2.9Ghz, 32GB ram, GeForce RTX 2060 (6GB), Windows 10
Lenovo Thinkpad - i7-1270P 2.20 GHz, 32GB RAM, Nvidia T550, Windows 11

View solution in original post

3 REPLIES 3
Solution
Barry Kelly
Moderator
If you don't want doors there is no need for a criteria to not include them.
The group of layers needs to be contained in brackets as well.

Barry.
One of the forum moderators.
Versions 6.5 to 27
i7-10700 @ 2.9Ghz, 32GB ram, GeForce RTX 2060 (6GB), Windows 10
Lenovo Thinkpad - i7-1270P 2.20 GHz, 32GB RAM, Nvidia T550, Windows 11
Anonymous
Not applicable
The brackets solved it! Thank you!
runxel
Legend
DangDang wrote:
The brackets solved it! Thank you!
As a simple reminder:
Whenever you mix "and" and "or" in a schedule you will most probably need brackets. (:
Lucas Becker | AC 27 on Mac | Author of Runxel's Archicad Wiki | Editor at SelfGDL | Developer of the GDL plugin for Sublime Text | My List of AC shortcomings & bugs | I Will Piledrive You If You Mention AI Again |

POSIWID – The Purpose Of a System Is What It Does /// «Furthermore, I consider that Carth... yearly releases must be destroyed»