Documentation
About Archicad's documenting tools, views, model filtering, layouts, publishing, etc.
SOLVED!

Grid Line

Anonymous
Not applicable
I drew a number of grid lines on the plan. Some grid lines are shown on the sections and elevations but some don't. The one confused me further is for example Grid '1' shown in the floor plan and Section A but doesn't show up in Section B or Elevations.
1 ACCEPTED SOLUTION

Accepted Solutions
Solution
Anonymous
Not applicable
Did you check the settings for Section/Elevation for these particular grid lines. You could accidentally turned off its markers. Or perhaps you have staggering the marks and your Section/Elevation have limited height.
Hope this helps.

View solution in original post

2 REPLIES 2
Solution
Anonymous
Not applicable
Did you check the settings for Section/Elevation for these particular grid lines. You could accidentally turned off its markers. Or perhaps you have staggering the marks and your Section/Elevation have limited height.
Hope this helps.
Barry Kelly
Moderator
I don't use grid lines, but isn't there something about them having to be parallel/perpendicular to the section elevation, otherwise they don't show?
I recall reading something here about it before.
If I can find the post I will add a link.


Barry.
One of the forum moderators.
Versions 6.5 to 27
Dell XPS- i7-6700 @ 3.4Ghz, 16GB ram, GeForce GTX 960 (2GB), Windows 10
Lenovo Thinkpad - i7-1270P 2.20 GHz, 32GB RAM, Nvidia T550, Windows 11