No, no problems...
I opened a new file and drew an archicad profile wall (brick wall w/ molding).
Window works like a charm. If I use a profile wall that I have made, 2X6 stud wall with skins... no go. A black dot appears as though a library part is not loaded. It is there in 3D but in 2D it is missing, although the marker is there and an empty opening.
Mmmmm....
All the different profiles I have been making seem to have the same problem. Once the window is gone I can turn the wall into a profile that worked earlier and now no go. Can't undo back to a state where the window is good either. Stays a black dot like a missing part...
I can make the problem happen if I put a window into the AC profile PreCast Invert T. Try that and see if happens for you.
I opened a new file and drew an archicad profile wall (brick wall w/ molding).
Window works like a charm. If I use a profile wall that I have made, 2X6 stud wall with skins... no go. A black dot appears as though a library part is not loaded. It is there in 3D but in 2D it is missing, although the marker is there and an empty opening.
Mmmmm....
All the different profiles I have been making seem to have the same problem. Once the window is gone I can turn the wall into a profile that worked earlier and now no go. Can't undo back to a state where the window is good either. Stays a black dot like a missing part...
I can make the problem happen if I put a window into the AC profile PreCast Invert T. Try that and see if happens for you.
Here is a screen shot.
I made a new file using AC10 Standar template. AC10 library loaded.
All fine. Using the supplied profile 'brick wall w/ molding' on left. That works fine.
One on right is a copy of the original profile the difference is that I have added another fill to the right to represent a sheathing 'skin' or what have you. Large for display purposes. As soon as I add that extra fill via the profile editor and store profile the window / door go buggy. Script error. If I switch back to the other profile the window / door work again. The only difference is the addition of a fill in the editor...
I just copied / pasted the wall fill and moved it over (changed fill type so it is visible). Does it every time.
Now I will try and replicat when I build a profile from scratch.
I made a new file using AC10 Standar template. AC10 library loaded.
All fine. Using the supplied profile 'brick wall w/ molding' on left. That works fine.
One on right is a copy of the original profile the difference is that I have added another fill to the right to represent a sheathing 'skin' or what have you. Large for display purposes. As soon as I add that extra fill via the profile editor and store profile the window / door go buggy. Script error. If I switch back to the other profile the window / door work again. The only difference is the addition of a fill in the editor...
I just copied / pasted the wall fill and moved it over (changed fill type so it is visible). Does it every time.
Now I will try and replicat when I build a profile from scratch.
OK.
Made two profiles from scratch.
Profile C w/ one fill works sort of (if I try to change the window fill from the AC loaded one to empty fill- bugs out).
Profile D three fills in editor no works at all. I can change window parts, whatever, doesn't work.
Profiles A has gone buggy in the interim of it's own accord. Has not been modified at all since first screen shot.
So, I give up... This should be easy right? Anyone out there able to replicate this or am I in some twilight zone (archicad) alternate dimension?
I have sleep to sleep and work to do so good bye profile editor for now...
(I had dreams of super customizable profiles w/ custom pensets for sections with top plates, other details etc. Moldings and water tables and changes in sidings and stemwalls w/ footings and sill plates and A.B.'s and on and on and.... Oh my broken heart...)
Made two profiles from scratch.
Profile C w/ one fill works sort of (if I try to change the window fill from the AC loaded one to empty fill- bugs out).
Profile D three fills in editor no works at all. I can change window parts, whatever, doesn't work.
Profiles A has gone buggy in the interim of it's own accord. Has not been modified at all since first screen shot.
So, I give up... This should be easy right? Anyone out there able to replicate this or am I in some twilight zone (archicad) alternate dimension?
I have sleep to sleep and work to do so good bye profile editor for now...
(I had dreams of super customizable profiles w/ custom pensets for sections with top plates, other details etc. Moldings and water tables and changes in sidings and stemwalls w/ footings and sill plates and A.B.'s and on and on and.... Oh my broken heart...)
this has nothing to do with the subject but:
when placing doors and windows in ac10, you can see a water mark of their width !!!! very niiiiice ac10
(maybe always been there but this is my first time i see it )
when placing doors and windows in ac10, you can see a water mark of their width !!!! very niiiiice ac10
(maybe always been there but this is my first time i see it )
Trying to keep this thread alive. I can make this error happen every time.
Anybody else?
Even if I select a current composite wall and convert it to profile it immediately loses it's doors and windows... every time, all current AC10 library...
Anybody else?
Even if I select a current composite wall and convert it to profile it immediately loses it's doors and windows... every time, all current AC10 library...
Didn't find the answer?
Check other topics in this Forum
Back to ForumRead the latest accepted solutions!
Accepted SolutionsStart a new conversation!
