Object disappears when viewing with the marquee-tool

[Kamelite]

So, this is an interesting problem:

What happens is this: I have a beam, that when set to Floor plan display - Cut only in the selection-settings, it disappears when looking at the model in 3D using the marquee-tool. While in 3D, hitting the Escape-button and then F5 to render the entire model, it magically appears.

However, if I change the Floor Plan Display value to Projected, it will render using the marquee-tool.

I have a total of 8 beams, and the seven others renderers like a charm as long as they are set to Projected. They are all on the same layer, and they were all created at the same time, so I don't think there are different settings that are the problem. Also, it doesn't matter which of the 8 I set to Cut only, when I do, it disappears.

Am I missing something, or is it a bug?

.Kamelite

[Link]

Is it's home story the same as the others?

Cheers,
Link.

[Kamelite]

Yes, the home story is the same for all 8


.Thag

[Link]

Perhaps try uploading a module file of them do we can see if we can replicate the issue.

Cheers,
Link.

[Barry Kelly]

If your beam is set to display as 'Cut Only' then it may not display in floor plan (depends on the height of the beam).
Then if you use a single storey marquee you will not see it in 3D either simply because it is not there in plan.

You need to use the 'All Storey' (thick) marquee.

Barry.

[Kamelite]

"Link" wrote:
Perhaps try uploading a module file of them do we can see if we can replicate the issue.

Cheers,
Link.

I planned to attach the Whole file, but size restrictions didn't allow it.

Anyway, I solved the problem that made me change the settings in the Floor Plan Display in the first Place, but I'm still curious about wether it's me or the software 🙂


.Thag