Hotlink Module Dose Not Work with Trace?

Anonymous · ‎2009-10-19

Hi,
I have hotlinked a two story (pln) building, floors -1 & 1, but when I am in 1st floor of host using the Trace "Below Current Story" the -1 story Does Not show up. Layers and elements are all on. In project Map floor -1 is visible & in the original Module (pln) it shows!
Any thoughts why?
Joseph

Anonymous · ‎2009-10-20

Do you have another floor between -1 and 1 ?
If so it can't show up in TRACE.
And if you, you can right-click at floor -1 and choose show as trace ref....
Hope it helps....
cheers

Laszlo Nagy · ‎2009-10-20

In the host file if you go down to that Floor, does it show?
Or after you used that -1 floor as Trace Reference, click the Switch Reference with Active button in the Trace Reference Palette. Does it show then?

Loving Archicad since 1995 - Find Archicad Tips at x.com/laszlonagy
AMD Ryzen9 5900X CPU, 64 GB RAM 3600 MHz, Nvidia GTX 1060 6GB, 500 GB NVMe SSD
2x28" (2560x1440), Windows 10 PRO ENG, Ac20-Ac29

Anonymous · ‎2009-10-21

Sorry Sorry,
Problem was that I did not click on Reset to Default Position

Hotlink Module Dose Not Work with Trace?

Didn't find the answer?

Check other topics in this Forum

Read the latest accepted solutions!

Start a new conversation!