About luke-asplan

luke-asplan · 2024-11-05

Hello Graphisoft Community,We are currently trying to go more BIM based with our company, we are getting most of our BIM based objects from https://www.bimobject.com, seems to be one of the best we have found. Some objects are abit hit and miss, but ...

luke-asplan · 2024-09-10

Hello Graphisoft Commuity,This may be an easy fix, but i seem to be having an issue with fill orientations within a sloped roof.I have drawn a 4 hipped composite roof using 'Roof>geometry method > multi-plane. The composite has 2 layers with insulati...

luke-asplan · 2024-11-06

Thanks Lingwisyer, any specific manufacturers you have found to be good?When converting from SKP or RVT does it still keep the actual information side of the object though? We are trying to use real world objects that have links back to the manufactu...

luke-asplan · 2024-11-05

Thanks CosminF, Yes similar issue, most suppliers either don't support BIM or not in our native formats.Thanks Barry, helpful as always. I have been through this list in the past most were not great, hopefully they have improved!Will give them ago ag...

luke-asplan · 2024-09-11

Thanks again Barry,Yes exactly that, an element within an element (insulation between rafters).Yes as you said both solutions are not ideal.It seems i have to pick between either the drawing part being visually correct by splitting the skins or the t...

luke-asplan · 2024-09-11

Thank you Barry,Yes i hadn't came across this problem until now, usually i had drawn as you mentioned as a single style fill and more skins to a layer.E.G. Skin 1 plasterboard, Skin 2 insulation, Skin 3 insulation, Skin 4 airgap.Main reason of trying...

luke-asplan · 2024-09-11

Hello Barry, Thank you for your reply.I have tried adding a diagonal line within the fill to see if the gap was an issue, it appears that's not where the issue falls.Ideally we are trying to move away from adding an air gap skin so that the skin list...

User Statistics

User activity

Bim objects / object libraries

Fill orientation for roof in sections inverted at change of direction

Re: Bim objects / object libraries

Re: Bim objects / object libraries

Re: Fill orientation for roof in sections inverted at change of direction

Re: Fill orientation for roof in sections inverted at change of direction

Re: Fill orientation for roof in sections inverted at change of direction