There should be a setting or pop-up palette which asks if favorites are
to be placed on current story or not before placement. Favorites have to
be created somewhere…. we typically create them on L1 in our template,
and we have literally hundreds fav...
Possible bug?When editing a dimension string which has custom text
between two nodes, the default reverts to the measured value and hides
the custom text. The default should remember which part of the string
has additional custom text applied and sho...
Missing functionality - why is Gravity not associative? If slab, roof
etc. changes elevation, elements placed on them using gravity should
adjust accordingly - at this stage elements are left behind and need to
be manually edited.
Provide the option to not auto join beams in plan - beams are typically
used to model curbs – should they have different heights we need to show
a line in plan where the height changes. Current workarounds require
either a 2D line or separating the b...
ok so here's the discovery that fixed it - when you first move a file
from BIMcloud Basic to BIMcloudSAAS, all users read the libraries with
no issue, as they're still apparently reading from the old server -
resharing as a new file which loads the l...
I am having the same issue - I reshared a teamwork file to the
BIMcloudSAAS, and after that 2 out of the 5 users on the project have
all the libraries missing - they appear to be attempting to load the
libraries from the BIMcloud Basic, even though t...
exactly - if there was a setting in the Beam tool to "turn off
intersection at junction" (ideally you can check this differently at
each end of the beam) it would make these scenarios far easier to manage
- we have to "cheat" and stop a beam a fracti...
in theory yes, but it shouldn't be an all-or-nothing scenario...we still
want those beams / footings that are the same to intersect with one
another, and would prefer to not have to manage intersecting of
different footing and beam sizes using layers...
yes, I am aware of reference line location options and dimensioning to
them, but the reference line is not always in the same place especially
when you need to adjust it lines to ensure walls join at complex
junctions. We want to be able to select so...
