on 2017-07-0707:21 AM - edited on 2021-11-2806:45 PM by Rubia Torres
This article presents how to create a glass panel railing with posts.
We used an L-shaped staircase where the Riser Offset is set to 0. In this case only one post will be added by the intersection point of the two flights.
Activate the Railing Tool.
Navigate to 'Segment' on the left side of the panel.
Delete everything from the 'Pattern Editor Preview', this way we will have a fresh start to create our own pattern.
Delete the default pattern by selecting the items in the Preview and erasing them one by one by using the 'minus' button at the upper right corner.
First we will define the Pattern and then continue by adding other components and customising the Railing elements. The last step will be the editing of the Ends and Connections of the Railing.
Select the Inner Post option on the left and add one to the Pattern by clicking on the 'plus' icon. By placing the Inner Post we define the length of the Pattern. After adding the Inner Post graphically, enter the 'Distance from Previous' value. Let's change it to 1000 mm.
Select the Panel option on the left side and add one to the Pattern the same way as the Inner Post was added.
Instead of a Handrail, a we will only use a Toprail.
Navigate to the 'Toprail' option on the left side, click on the 'plus' icon on the right and add the Toprail to the Pattern.
Change the following settings for the Toprail in the Railing Default Settings.
Change the following settings for the Panel in the Railing Default Settings.
Navigate to the 'Inner Post' option on the left side and set the following values:
Navigate to the 'Post' option on the left side and enter the same values.
Each type of Rail (Toprail, Handrails, regular Rails) can have a specific ending. It is possible to define the geometry and the length ('Extension Length') of a Rail. If you do not want to display an ending, set the Extension Length to 0, or use the Invisible Ending component.
In this case use the following settings:
For each type of Rail (Toprail, Handrails, regular Rails), it is possible to define how the different Segments will connect where the Railing changes direction.
Different types of geometry methods can be selected.
It is very important to find the right connection type in case of U-shaped and L-shaped stairs.
In our example an L-shaped stair was used. Only one post is placed at the connection of the two segments of the railing. Because of this geometry method the 'Disconnect' option was selected.
Watch the video to see how to place railings using various methods.