Modeling
About Archicad's design tools, element connections, modeling concepts, etc.

Display Line Thinkness

Anonymous
Not applicable
Hi everyone
An original file in DXF has been imported in archicad and cleaned. Saved as PLN in Archicad 21.
There is no way to activate line thickness on the screen (printing is fine). If I open a new worksheet and draw a line I will see the correct line thickness as soon I copy part of my drawing from another working sheet in the one I see line thicknesses.... the thickness view would disappear and all line are the same.
Anyone has an explanation for this?

Thank you very much
1 REPLY 1
David Maudlin
Virtuoso
mworld:

One thing to check is the scale of the worksheet. If the scale is large (1:1, 1:2, etc.) then you have to be zoomed very far in to see line thicknesses.

You should add a Signature to your Profile (click the Profile button near the top of this page) with your ArchiCAD version and operating system (see mine for an example) for more accurate help in this forum.

David
David Maudlin / Architect
www.davidmaudlin.com
Digital Architecture
AC27 USA • iMac 27" 4.0GHz Quad-core i7 OSX11 | 24 gb ram • MacBook Pro M3 Pro | 36 gb ram OSX14