Libraries & objects
About Archicad and BIMcloud libraries, their management and migration, objects and other library parts, etc.
SOLVED!

Library Door with fixed part

Jose Gradoli
Booster

Hi, 

First of all sorry if the question is not understandable, because I want to draw a door like the one attached in the post which has a "tarja" (fixed part in the upper side of the door), but there's nothing similar in the AC Library..

 

¿Is there any door or object similar to the one I want in the library?


2022-12-23 09.46.52.jpgCaptura de pantalla 2022-12-23 a las 9.47.10.png
www.formaarquitectura.com
ARCHICAD 25 SPA
1 ACCEPTED SOLUTION

Accepted Solutions
Solution
Rubia Torres
Graphisoft
Graphisoft

Hi Jose,

 

You can achieve the desired result by setting the object "Door with Transom". Please check the screenshots below (from Archicad 26). Hope they will help you 😉

Screenshot 2022-12-29 at 12.08.12.pngScreenshot 2022-12-29 at 12.08.01.pngScreenshot 2022-12-29 at 12.20.22.pngScreenshot 2022-12-29 at 12.19.30.pngScreenshot 2022-12-29 at 12.24.32.png

 

Cheers,

Rubia Torres

Community Specialist | GRAPHISOFT SE
Need help refining your Archicad skills?
Check our Modeling knowledge base for the best workflow + tips&tricks!

View solution in original post

3 REPLIES 3
Solution
Rubia Torres
Graphisoft
Graphisoft

Hi Jose,

 

You can achieve the desired result by setting the object "Door with Transom". Please check the screenshots below (from Archicad 26). Hope they will help you 😉

Screenshot 2022-12-29 at 12.08.12.pngScreenshot 2022-12-29 at 12.08.01.pngScreenshot 2022-12-29 at 12.20.22.pngScreenshot 2022-12-29 at 12.19.30.pngScreenshot 2022-12-29 at 12.24.32.png

 

Cheers,

Rubia Torres

Community Specialist | GRAPHISOFT SE
Need help refining your Archicad skills?
Check our Modeling knowledge base for the best workflow + tips&tricks!

Hi,

Thanks a lot for your answer. I'm still in AC25 waiting AC26 ARM SPA, but the door library object is the same in AC25 and 26. 

 

The solution is 90 % suitable but it still appears a frame between the higher and lower part of the door.

 

I replied your instructions in AC25 and 26 and the frame is still there

 

In any case it's much more useful than the way I was drawing those doors.

Thanks again

Captura de pantalla 2023-02-10 a las 11.51.39.png

Captura de pantalla 2023-02-10 a las 11.52.07.png

Captura de pantalla 2023-02-10 a las 11.52.32.png

Captura de pantalla 2023-02-10 a las 11.52.46.png

    

www.formaarquitectura.com
ARCHICAD 25 SPA

AS @Rubia Torres has said, only i add few things as a workaround to achieve your targeted door, by adjusting the working units to be (0,0000) 4 numbers tolerance then adjust Transom frame width in Frame style & Dimensions panel to be ( 0.0001 m in my case ) then you can retrieve your default working units it will appear as 0 value:

 

Screenshot (3).png

Screenshot (6).png 

Screenshot (4).png

Screenshot (5).pngScreenshot (7).png

AC 27 INT 5003 - AC 26 INT 6019 ( For MEP Purposes )
AMD Ryzen 7 5800H with Radeon Graphics 3.20 GHz 16.0 GB