Project data & BIM
About BIM-based management of attributes, schedules, templates, favorites, hotlinks, projects in general, quality assurance, etc.

Zone Stamp Cross

Anonymous
Not applicable
When I create a Zone stamp, there's a little cross in the middle. How can I remove that?

I've looked in settings, but I find nothing;)
3 REPLIES 3
Barry Kelly
Moderator
That is the location point for your automatic zone.
It will search for the bounding walls (zone boundaries) around this marker when you place the zone and also when you update the zones.

You can move it but you must leave it inside the zone boundaries otherwise your zone will move when you update.

It will not print so just ignore it.

The only way to turn it of is to make the zone a 'manual' zone.

Barry.
One of the forum moderators.
Versions 6.5 to 27
Dell XPS- i7-6700 @ 3.4Ghz, 16GB ram, GeForce GTX 960 (2GB), Windows 10
Lenovo Thinkpad - i7-1270P 2.20 GHz, 32GB RAM, Nvidia T550, Windows 11
Lingwisyer
Guru
Doesn't the zone text also rotate around this point? ie. Text rotation & always readable

AC22-23 AUS 7000Help Those Help You - Add a Signature
Self-taught, bend it till it breaksCreating a Thread
Win10 | R5 2600 | 16GB | GTX1660 
Barry Kelly
Moderator
As far as I know the zone text is independent of this zone anchor and will rotate about the text anchor point.
You may or may not be able to choose this text anchor point depending on if the object scripting allows it.
It will stay in the relative position of the zone anchor if you rotate the entire zone but it will pivot on the text anchor point.

The text can be moved where ever you want, even outside of the zone.

Barry.
One of the forum moderators.
Versions 6.5 to 27
Dell XPS- i7-6700 @ 3.4Ghz, 16GB ram, GeForce GTX 960 (2GB), Windows 10
Lenovo Thinkpad - i7-1270P 2.20 GHz, 32GB RAM, Nvidia T550, Windows 11