Roof Slope is Not Correct

[Eric Milberger]

On hte attached - I have placed a truss which matches a dashed line - both drawn at 4/12 slop
The roof is also drawn at what is shown as 4/12 but is NOT at 4/12

[Eric Milberger]

Here is the picture

[Barry Kelly]

Roof pitch can be input as an degrees or percentage.
How did you input a 4/12 pitch?

You can use the pet palette in section to adjust the pitch to match the truss/line.

Barry.

[Eric Milberger]

I put in the pitch. Something was stuck in the element that was created.

I created another and it worked fine. I compared all info boxes and all were the same with different results.