BradJAllen19 wrote:
Short of creating new materials with higher priorities just for the bump out wall or using 2d fills in plan I'm not sure what to do.
That is the basic idea
Building Materials with the same strength will merge.
Stronger ones will cut weaker ones.
So you ideally want the outer layers to be stronger.
However sometimes you will need the same material on the inside and the outside.
In that case, duplicate the outside material and make the inside one weaker.
I include the strength in the material name (rather than 'inside' or 'outside').
In my example you can see the strength in brackets.
The 2 numbers in my example here are the old pre-version 16 strength and then the current strength.
You only need the current strength - I need to edit the old ones out now - just lazy!).
Barry.
One of the forum moderators.
Versions 6.5 to 27
i7-10700 @ 2.9Ghz, 32GB ram, GeForce RTX 2060 (6GB), Windows 10
Lenovo Thinkpad - i7-1270P 2.20 GHz, 32GB RAM, Nvidia T550, Windows 11