cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 
Libraries & objects
About Archicad and BIMcloud libraries, their management and migration, objects and other library parts, etc.

Door Problem

Anonymous
Not applicable
When I go to place a double door (a D2 or in this case a D2 Segmented Transom) the door panel width always changes on me. For example, I place the door with the default width, let's say 5'-0". Let's say I go to enlarge the door to a 6'-0" width, this is where the problem arises. One panel stays at 2'-6" wide and the other goes to 3'-6" wide. I know under "Elevation and Opening" you can change the width to match (you have to manually do the math for it and type it in), but in this specific case that is grayed out and I cannot do anything. Shouldn't the door panels automatically be the same width anyway? What is happening in this specific case that I cannot change the width?
7 REPLIES 7
Anonymous
Not applicable
72 Views and no answer? Can anyone replicate this issue? Does it work for anyone? Is this a bug? Should I complain to Graphisoft? Am I asking too many questions? Is anyone annoyed? Is anyone listening? My avatar is lonely....
Anonymous
Not applicable
Maybe a screenshot will help?
Architects tend to see problems visually.
Anonymous
Not applicable
Maybe I just stumped everyone
Erika Epstein
Booster
It's a known problem and has been discussed in earlier posts.
Erika
Architect, Consultant
MacBook Pro Retina, 15-inch Yosemite 2.8 GHz Intel Core i7 16 GB 1600 MHz DDR3
Mac OSX 10.11.1
AC5-18
Onuma System

"Implementing Successful Building Information Modeling"
Anonymous
Not applicable
Steven wrote:
72 Views and no answer? Can anyone replicate this issue? Does it work for anyone? Is this a bug? Should I complain to Graphisoft? Am I asking too many questions? Is anyone annoyed? Is anyone listening? My avatar is lonely....
maybe if you ask into the correct discussion (like "working in AC")
Stress Co_
Advisor
Look in "Door Panel" Parameters for "Panel Division Type".
Check: Proportional

and a screen shot for us Architects
Marc Corney, Architect
Red Canoe Architecture, P. A.

Mac OS 10.15.7 (Catalina) //// Mac OS 14.5 (Sonoma)
Processor: 3.6 GHz 8-Core Intel Core i9 //// Apple M2 Max
Memory: 48 GB 2667 MHz DDR4 //// 32 GB
Graphics: Radeon Pro 580X 8GB //// 12C CPU, 30C GPU
ArchiCAD 25 (5010 USA Full) //// ArchiCAD 27 (4030 USA Full)
Erika Epstein
Booster
Stress wrote:
Look in "Door Panel" Parameters for "Panel Division Type".
Check: Proportional

and a screen shot for us Architects
Unfortunately, for the D2 Segmented Transom , this option is not available
Erika
Architect, Consultant
MacBook Pro Retina, 15-inch Yosemite 2.8 GHz Intel Core i7 16 GB 1600 MHz DDR3
Mac OSX 10.11.1
AC5-18
Onuma System

"Implementing Successful Building Information Modeling"