Door leaf undercut

David E · ‎2023-03-24

I generally size door openings via their leaf size as this is how I generate my door schedules, however I have issues with the ‘leaf undercut’ setting in the door parameters. Traditionally with undercuts I would expect the value of this gap to be added to the door leaf rather than taken off i.e. the wall opening size increases to take account of the whole door being lifted up to accommodate the floor finish.

Steve Jepson · ‎2023-03-25

Where is there a "leaf undercut" setting ? I don't think I have seen that.

ArchiCAD 25 7000 USA - Windows 10 Pro 64x - Dell 7720 64 GB 2400MHz ECC - Xeon E3 1535M v6 4.20GHz - (2) 1TB M.2 PCIe Class 50 SSD's - 17.3" UHD IPS (3840x2160) - Nvidia Quadro P5000 16GB GDDR5 - Maxwell Studio/Render 5.2.1.49- Multilight 2 - Adobe Acrobat Pro - ArchiCAD 6 -25

Mahmoud Qenawi · ‎2023-03-25

Leaf Undercut is an option you can find in settings panel for some types of doors but i think it's not available in USA version, see this post:

https://community.graphisoft.com/t5/Design-forum/ArchiCAD25-Door-Leaf-Undercut-Parameter-not-availab...

AC 28 INT 3001/WIN 11
AMD Ryzen 7 5800H with Radeon Graphics 3.20 GHz 16.0 GB

Christophe Fortineau · ‎2023-03-28

Hello,

In France we are able to cut each door leaf 5cm upper the floor with this parameter :

Christophe - FRANCE
Archicad Designer and Teacher
Archicad 15 to 27 FRA FULL

OS 11.6 Big Sur - MacBook Pro 2017 - 16Go RAM
"Quality is never an accident ; it's always the result of an intelligent effort" John Ruskin

Door leaf undercut

Didn't find the answer?

Check other topics in this Forum

Read the latest accepted solutions!

Start a new conversation!