GRID : Some not displaying

[Johann_P]

Firstly, thanks to all taking the time to help on this forum. It is greatly appreciated.

And for my next question:

I have grids showing on plan and elevation.

When I duplicate Grid B, it shows perfectly on both plan and elevation.
But when I rename it to "A", or "Test" it disappears from the elevation.

When I rename it back to "B" it reappears on the elevation.

Any idea why this happens?

[Eduardo Rolon · Accepted solution]

For Elevations and Sections you can filter Grids by name.
See if that is the problem

[Johann_P]

Thanks, that was the problem.

For those, like me, who needs about 10min just to find the "Elevations Settings"

Right click in the particulate elevation view.

[Eduardo Rolon]

Sorry about that, two other tricks you might find useful.
- Select All the Elevations in plan, right click and select settings, and edit them at the same time. Same for sections.
- To select all of the same types go to a view were all are shown (usually plan or 3D) select the tool and then use CTR+A or CMD+A to select all of them. For example, to select all section markers go to floor plan, select the Section Marker Icon and use CTRL(CMD)+A.

[Laszlo Nagy]

You can also select all Elevations in the Project Map, right-click and access the Elevation Settings Dialog.
With this method, your Elevation Markers do not need to be visible for you to be able to select them.