Informationen zu boatingcow

boatingcow · 2022-08-10

Hi everyone, I got into the habit of modelling wall, floor and roof components separately, in much the same way as they are built. This mainly helps with detailing and scheduling, but it's a bit of pain when it comes to doors and windows, but as you ...

boatingcow · 2017-03-23

Hi everyone, Often at the early stages of design, I like to produce schedules of pipe and wiring lengths, where for any given 'diameter' or 'wire gauge', I can give an early estimate of the total lengths required (at a later stage in design, other so...

boatingcow · 2016-12-23

Hi everyone, I have searched around for information on whether Ecodesigner will give realistic results if I model a building using real-world elements. That is to say, if I model a timber-frame house with insulation panels, services void, breather ca...

boatingcow · 2014-03-21

Hi there, every now and again I would like to place an object which is basically a slab, but in a plane other than horizontal (for example, a damp-proof membrane which follows both slab, wall and roof contours). I'd like to be able to list these obje...

boatingcow · 2013-05-21

I work predominantly in building services and as such I have to juggle the different standards in the world of architecture with the world of mechanical engineering. Part of my current job is to help our company set up some standards which are up-to-...

boatingcow · 2023-01-27

Coming from an engineering background, stories, levels and elevations to me are all simply just sections... My suggestion is to combine stories, reference levels, sections and elevations into a better reference/work planes system entirely, just like ...

boatingcow · 2022-10-06

Thank you both for your comments. However, the main reason for trying to find a fix to this was to address the requirement of the energy model to have a "watertight" model made using composite slabs, walls and roofs, but as far as I can tell, using a...

Re: open Profile follows open path in 3d · 2015-01-08

These are brilliant. I'm slowly getting to grips with GDL and I wonder if you have a version that works in ArchiCAD 17 to look at the code? Thanks!

boatingcow · 2015-01-08

Olivier, Mario, this tool is excellent. I think it should be a native feature of ArchiCAD! I have been looking for a tool like this for a while (see this post: http://archicad-talk.graphisoft.com/viewtopic.php?t=45472) but my GDL isn't so good! Do yo...

boatingcow · 2014-03-28

Thanks Laszlo, however ideally the surface should also have a thickness, so either the surface area & thickness, or just volume can be reported in the schedule. Similarly, the polyline should have a cross-section, so either length & section name or j...

Benutzerstatistik

Benutzeraktivitäten

Intersection priorities of roof and wall skins

3D polyline, wire, tube or pipe lengths in schedules

Real-world elements vs composite elements in Ecodesigner

"Surface" tool or ability to rotate slab from horizontal?

Working with BS1192/uniclass and ArchiCAD?

Re: Levels (like Revit)

Re: Intersection priorities of roof and wall skins

Re: open Profile follows open path in 3d

Re: Dynamic Polyline base code object

Re: "Surface" tool or ability to rotate slab from