About model and data exchange with 3rd party solutions: Revit, Solibri, dRofus, Bluebeam, structural analysis solutions, and IFC, BCF and DXF/DWG-based exchange, etc.
I set the Zone deduction(Figure 01), column relatoinship with zone(Figure 02) already. As you could see the Figure 03, the area difference would be around 2 sq.m. It's obvious the calculated area of Shop G(Figure 04). However other areas is correct. Any Comments?
Many times once I make a change in the layout, the calculated area in the zone schedule could not immediately display the change. Any Comments?
Works correctly for me in AC14.
When you placed the Columns or made any change to the Zone, did you use the Update Zone command. Those values will be correct only after the Zones are updated.
Loving Archicad since 1995 - Find Archicad Tips at x.com/laszlonagy AMD Ryzen9 5900X CPU, 64 GB RAM 3600 MHz, Nvidia GTX 1060 6GB, 500 GB NVMe SSD 2x28" (2560x1440), Windows 10 PRO ENG, Ac20-Ac27
Thank you! The update rectify the incorrect area calculation!
laszlonagy wrote: Works correctly for me in AC14.
When you placed the Columns or made any change to the Zone, did you use the Update Zone command. Those values will be correct only after the Zones are updated.
