cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 
Design forum

solid element operations

fa furrukh
Contributor

I was cutted slab with morph profile/shape for  slop shape, than morph put in to hidden layers , after than create wall on the top or other element so all objects was cutted same as well morph profile , how do i just slab cuting with solid element operation, 

thankyou 

2 REPLIES 2

Miha_M
Advisor

If you want to stick to this modeling method you should put the upper wall onto a different layer which has a different intersection priority number and repeat the SEO with the same operator.

Example here - the upper wall layer was set to wireframe for a better view and I used two single plane roof elements for operators:

Miha_M_0-1660132774199.png

 

 

Archicad 4.55 - 25 | HP Z840 | 2× E5-2643 v4 | 64 GB RAM | Nvidia Quadro M5000 @ Windows 10 Pro x64

Andrii Levko
Expert

You went by difficult way, instead to use the roof for a slope and then all the walls trim to roof.

Andrii
AC 8.1 - 25 INT/POL 5010

Still looking?

Browse more topics

Back to forum

See latest solutions

Accepted solutions

Start a new discussion!