AC19--Door/Window Markers in Elevation

[Dave Jochum]

Who's figured out how to display these in elevation with the "improved" AC19 label implementation? The option to "Label Window" no longer exists and the "Listings and Labeling" pane is gone from the Settings window.

[Dave Jochum]

Figured it out...I guess. In each elevation, choose the Label Tool. Select Identification Label 19. Choose "Associative" as label type. Set the various parameters as desired (including eliminating the "Pointer"). Then place by clicking each window and door in each elevation. Pretty tedious. There must be an easier way to "turn on" markers in a more global manner. But maybe not. Progress.

[David Maudlin]

Dave wrote:
Then place by clicking each window and door in each elevation. Pretty tedious. There must be an easier way to "turn on" markers in a more global manner. But maybe not. Progress.

There is a new command Label Selected Elements. If all the Windows are to be labeled, after modifying the Label settings, change to the Window Tool, Select All Windows, then Label Selected Elements. If the selection is more complicated, use Find & Select.

David

[Dave Jochum]

David wrote:
There is a new command Label Selected Elements.

Very good--thank you, David. For anyone else searching for this, the command can be found at Document-->Document Extras.

Dave

[Anonymous]

I don't have the Label Selected Elements in mine!

I cannot get a screen shot & photo of screen is too large to print, but when I open Document> Document extras it is the same as 18 with no "Label Selected Elements as in the screen shots etc

[Laszlo Nagy]

You have probably migrated your Work Environment from AC18 to AC19 and AC18 didn't have this command.
Go to the Work Environment and manually add this command to the menu.

[Anonymous]

Thanks Laszlo

[aahatimo]

Does it easily label doors and windows properly and in the right orientation now? I hope!