Pocket door problem

mukster · ‎2020-09-15

Archicad 23, MAC platform, When I try to put in a pocket door object, it shows up as a wide opening. Can't adjust it to show as a simple 3; door with the pocket going into the wall. I'm sure there's a simple setting that I just can't find.

Lingwisyer · ‎2020-09-16

mukster wrote:
simple 3; door with the pocket going into the wall

Not a possible configuration with the default Aus / Int libraries. Can you post a screenshot of the issue as well as what ever library you are using?

Ling

AC22-23 AUS 7000	Help Those Help You - Add a Signature
Self-taught, bend it till it breaks	Creating a Thread
Win11 \| i9 10850K \| 64GB \| RX6600	Win10 \| R5 2600 \| 16GB \| GTX1660

Stress Co_ · ‎2020-09-16

What door object are you using?
Are you trying to do 3 panels that all pocket into the wall?
This is D1 Pocket 23:

Marc Corney, Architect
Red Canoe Architecture, P. A.

Mac OS 10.15.7 (Catalina) //// Mac OS 14.5 (Sonoma)
Processor: 3.6 GHz 8-Core Intel Core i9 //// Apple M2 Max
Memory: 48 GB 2667 MHz DDR4 //// 32 GB
Graphics: Radeon Pro 580X 8GB //// 12C CPU, 30C GPU
ArchiCAD 25 (5010 USA Full) //// ArchiCAD 27 (4030 USA Full)

Barry Kelly · ‎2020-09-16

I think mukster might mean a 3 foot wide door rather then 3 panels - basically as Marc has shown.
But I may be wrong.

mukster,
Can you post an image of the door in plan or 3D with the settings as Marc has shown?
This will give us an idea of what is happening.
As you can see it seems to be working fine for Marc.

Barry.

One of the forum moderators.
Versions 6.5 to 27
i7-10700 @ 2.9Ghz, 32GB ram, GeForce RTX 2060 (6GB), Windows 10
Lenovo Thinkpad - i7-1270P 2.20 GHz, 32GB RAM, Nvidia T550, Windows 11

Pocket door problem

Didn't find the answer?

Check other topics in this Forum

Read the latest accepted solutions!

Start a new conversation!