We value your input! Please participate in Archicad 28 Home Screen and Tooltips/Quick Tutorials survey
2018-10-26 08:43 PM
Solved! Go to Solution.
2018-10-29 02:27 AM
hotspot c, -b/2, 0, unID, d, 1+128 : unID=unID+1 hotspot c, -b/2, -1, unID, d, 3+128 : unID=unID+1 hotspot c, -b/2, d, unID, d, 2 : unID=unID+1 hotspot 0, -b/2, d, unID, c, 1+128 : unID=unID+1 hotspot -1, -b/2, d, unID, c, 3+128 : unID=unID+1 hotspot c, -b/2, d, unID, c, 2 : unID=unID+1
2018-10-26 08:50 PM
2018-10-29 02:27 AM
hotspot c, -b/2, 0, unID, d, 1+128 : unID=unID+1 hotspot c, -b/2, -1, unID, d, 3+128 : unID=unID+1 hotspot c, -b/2, d, unID, d, 2 : unID=unID+1 hotspot 0, -b/2, d, unID, c, 1+128 : unID=unID+1 hotspot -1, -b/2, d, unID, c, 3+128 : unID=unID+1 hotspot c, -b/2, d, unID, c, 2 : unID=unID+1
2018-10-29 08:39 AM
Barry wrote:gr8. will try when I get some time. now preparing for internal IFC-training.
Sure.
You need 2 hotspots for each point - one for the x and one for the z.
But the x hotspot need to have the z parameter in it and the z hotspot need the x.
To move the hotspot you have shown ...
hotspot c, -b/2, 0, unID, d, 1+128 : unID=unID+1 hotspot c, -b/2, -1, unID, d, 3+128 : unID=unID+1 hotspot c, -b/2, d, unID, d, 2 : unID=unID+1 hotspot 0, -b/2, d, unID, c, 1+128 : unID=unID+1 hotspot -1, -b/2, d, unID, c, 3+128 : unID=unID+1 hotspot c, -b/2, d, unID, c, 2 : unID=unID+1
Barry.
2018-12-04 08:04 PM
Barry wrote:You're a gem Barry! I have to admit I didn't understand that you gave me the actual code... right there in front of me... Now I've got it .
Sure.
You need 2 hotspots for each point - one for the x and one for the z.
But the x hotspot need to have the z parameter in it and the z hotspot need the x.
To move the hotspot you have shown ...
hotspot c, -b/2, 0, unID, d, 1+128 : unID=unID+1 hotspot c, -b/2, -1, unID, d, 3+128 : unID=unID+1 hotspot c, -b/2, d, unID, d, 2 : unID=unID+1 hotspot 0, -b/2, d, unID, c, 1+128 : unID=unID+1 hotspot -1, -b/2, d, unID, c, 3+128 : unID=unID+1 hotspot c, -b/2, d, unID, c, 2 : unID=unID+1
Barry.
2018-12-05 06:34 AM
Mats_Knutsson wrote:You are welcome.
Thanks again.
M
2018-12-06 08:08 AM
Barry wrote:It's a Swedish national sport... I was actually in sync but the vidcap program fps is really crap. Made me start to understand why my son is moaning about bad fps when gaming....
Mats_Knutsson wrote:You are welcome.
Thanks again.
M
I can't say I have ever seen a dancing Archicad model before.
Barry.