cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 
BIM Coordinator Program (INT) April 22, 2024
Find the next step in your career as a Graphisoft Certified BIM Coordinator!
Modeling
About Archicad's design tools, element connections, modeling concepts, etc.

How do you usually create non rectangular collumns?

Anonymous
Not applicable
I can't see a way to create irregular shaped columns.

How do you usually handle such a case?
27 REPLIES 27
Anonymous
Not applicable
do i create two meshes, one inside the other? i did that and gave an elevation to the smaller mesh inside the outer, but i can't seem to stretch the lower edges to create a regular, sloped mesh on four sides. i think i must not be getting it?
Laszlo Nagy
Community Admin
Community Admin
Draw a Mesh with a Rectangular contour.
Then select this newly-drawn Mesh, and within its boundaries, draw another Rectangle. This will be the top of the Column and will be the size it tapers down to.
Click on these last newly-created ridges and with Pet Palette (the little Palette that pops up) commands, raise its height.
You can do this last step in 3D as well to make it more visual.
Also, check the Manual as suggested.
Loving Archicad since 1995 - Find Archicad Tips at x.com/laszlonagy
AMD Ryzen9 5900X CPU, 64 GB RAM 3600 MHz, Nvidia GTX 1060 6GB, 500 GB NVMe SSD
2x28" (2560x1440), Windows 10 PRO ENG, Ac20-Ac27
Anonymous
Not applicable
Marta,
There is an object called "ArtZandCraftZ column"
at Objects On Line that make columns in the bungalow style
you describe. I mention this but I hope you decide
to learn how to make it with the mesh tool.
The mesh tool is powerful.
Peter Devlin
Anonymous
Not applicable
peter, thanks for the tip about the column style. lazlo, thank you for explaining it to me. it worked. i had been creating two separate meshes instead of one! thanks ignacio. i would have given up on this program a while ago withou this forum.
marta wrote:
i would have given up on this program a while ago withou this forum.
Oh, always ask and just *don't* give up. If you give up you will never feel soo good for all you would be missing if you had given up. The initial pain is excruciating, you want to smash the computer etc., but you will find the rewards are worth it. They would be worth twice the pain too.
Anonymous
Not applicable
Reading this post about using the mesh tool sounded like a simple solution compared to using Steep roof slabs as operators to SEO the originally rectangular column.

I created a tapered (36" tall) column using a mesh. assigned a River Rock material to the mesh. See the Result below. The material is not displaying properly.

Also the Section view does not display the Fill pattern.
Tapered Mesh.JPG
Anonymous
Not applicable
Just Checked That vertoral 3D Hatching was not check in Section settings. Fill does show. Still strange 3d view.
Anonymous
Not applicable
Here is a view of the way I had previously produced tapered Columns using Square column as Target and Roof surfaces (on hidden layer) as Operators.

The Watertable on to is just roofs.
Learn and get certified!