Rafters

tea lover · ‎2023-10-03

Lingwisyer · ‎2023-10-03

Trim to Roof will delete anything that intersects with the selected roof as well as what it below or above depending on the selected setting and anything outside the extents of the roof. If you are wanting to remove the rafters that are extending through your gable, you would be best to use a 3rd element, such as a slab, in a Solid Element Operation with Upward / Downward Extrusion.

If you model your roof covering as a seperate element, and split the gables covering from the main roofs covering Trim to Roof would work as desired.

Ling.

AC22-23 AUS 7000	Help Those Help You - Add a Signature
Self-taught, bend it till it breaks	Creating a Thread
Win11 \| i9 10850K \| 64GB \| RX6600	Win10 \| R5 2600 \| 16GB \| GTX1660

Steve Jepson · ‎2023-10-03

Your Rafters are Grouped. Ungroup so you can adjust the rafters. But there is not much point since the rest of the roof is not framed correctly anyhow.

Show the roof (if you like) and I will frame it for you so you have an example.

ArchiCAD 25 7000 USA - Windows 10 Pro 64x - Dell 7720 64 GB 2400MHz ECC - Xeon E3 1535M v6 4.20GHz - (2) 1TB M.2 PCIe Class 50 SSD's - 17.3" UHD IPS (3840x2160) - Nvidia Quadro P5000 16GB GDDR5 - Maxwell Studio/Render 5.2.1.49- Multilight 2 - Adobe Acrobat Pro - ArchiCAD 6 -25

mthd · ‎2023-10-04

Hi TL, what method did you use to create your rafters with ? Did you use the roof wizard ? Because you can edit and place 3D rafters manually as well.

AC8.1 - AC28 ARM AUS + CI Tools
Apple Mac Studio M1 Max Chip 10C CPU
24C GPU 7.8TF 32GB RAM OS Sequoia

Rafters

Still looking?

Browse more topics

See latest solutions

Start a new discussion!