Stair "Draining" display in plan

[Anonymous]

Is it possible to display Stair's "Draining" in a plan-view?

I have a stair where I have activated "Draining" for both the Flight and the Landing. It shows nicely in the 3D, but I can't figure out where to turn on its visibility in plan, or where to find any display controls for it.

In the 2D-plan, the risers extend all the way to the edge.

Any ideas? Or any ideas how to model such stair with other method? Ideally within the Stair tool...

[Minh Nguyen]

Hello,

Thank you for pointing it out to me! I forgot that the default template set Working Unit to 0 digit, that's why 0.1mm shows as 0 to me.

Regarding the double line, I tried again and found that the Tread's Finish Extension, by default, is set at 15mm. If you set it to 0, no double line should appear on the stair. I attached a screenshot of this parameter.

Hope this helps!

Best regards,
Minh

[Anonymous]

For me it seems to be the "Riser Thickness" that is showing on plan.
But I have only tried it in 22, maybe it works better in newer versions.