No, no problems...
I opened a new file and drew an archicad profile wall (brick wall w/ molding).
Window works like a charm. If I use a profile wall that I have made, 2X6 stud wall with skins... no go. A black dot appears as though a library part is not loaded. It is there in 3D but in 2D it is missing, although the marker is there and an empty opening.
Mmmmm....
All the different profiles I have been making seem to have the same problem. Once the window is gone I can turn the wall into a profile that worked earlier and now no go. Can't undo back to a state where the window is good either. Stays a black dot like a missing part...
I can make the problem happen if I put a window into the AC profile PreCast Invert T. Try that and see if happens for you.
I opened a new file and drew an archicad profile wall (brick wall w/ molding).
Window works like a charm. If I use a profile wall that I have made, 2X6 stud wall with skins... no go. A black dot appears as though a library part is not loaded. It is there in 3D but in 2D it is missing, although the marker is there and an empty opening.
Mmmmm....
All the different profiles I have been making seem to have the same problem. Once the window is gone I can turn the wall into a profile that worked earlier and now no go. Can't undo back to a state where the window is good either. Stays a black dot like a missing part...
I can make the problem happen if I put a window into the AC profile PreCast Invert T. Try that and see if happens for you.
Here is a screen shot.
I made a new file using AC10 Standar template. AC10 library loaded.
All fine. Using the supplied profile 'brick wall w/ molding' on left. That works fine.
One on right is a copy of the original profile the difference is that I have added another fill to the right to represent a sheathing 'skin' or what have you. Large for display purposes. As soon as I add that extra fill via the profile editor and store profile the window / door go buggy. Script error. If I switch back to the other profile the window / door work again. The only difference is the addition of a fill in the editor...
I just copied / pasted the wall fill and moved it over (changed fill type so it is visible). Does it every time.
Now I will try and replicat when I build a profile from scratch.
I made a new file using AC10 Standar template. AC10 library loaded.
All fine. Using the supplied profile 'brick wall w/ molding' on left. That works fine.
One on right is a copy of the original profile the difference is that I have added another fill to the right to represent a sheathing 'skin' or what have you. Large for display purposes. As soon as I add that extra fill via the profile editor and store profile the window / door go buggy. Script error. If I switch back to the other profile the window / door work again. The only difference is the addition of a fill in the editor...
I just copied / pasted the wall fill and moved it over (changed fill type so it is visible). Does it every time.
Now I will try and replicat when I build a profile from scratch.
OK.
Made two profiles from scratch.
Profile C w/ one fill works sort of (if I try to change the window fill from the AC loaded one to empty fill- bugs out).
Profile D three fills in editor no works at all. I can change window parts, whatever, doesn't work.
Profiles A has gone buggy in the interim of it's own accord. Has not been modified at all since first screen shot.
So, I give up... This should be easy right? Anyone out there able to replicate this or am I in some twilight zone (archicad) alternate dimension?
I have sleep to sleep and work to do so good bye profile editor for now...
(I had dreams of super customizable profiles w/ custom pensets for sections with top plates, other details etc. Moldings and water tables and changes in sidings and stemwalls w/ footings and sill plates and A.B.'s and on and on and.... Oh my broken heart...)
Made two profiles from scratch.
Profile C w/ one fill works sort of (if I try to change the window fill from the AC loaded one to empty fill- bugs out).
Profile D three fills in editor no works at all. I can change window parts, whatever, doesn't work.
Profiles A has gone buggy in the interim of it's own accord. Has not been modified at all since first screen shot.
So, I give up... This should be easy right? Anyone out there able to replicate this or am I in some twilight zone (archicad) alternate dimension?
I have sleep to sleep and work to do so good bye profile editor for now...
(I had dreams of super customizable profiles w/ custom pensets for sections with top plates, other details etc. Moldings and water tables and changes in sidings and stemwalls w/ footings and sill plates and A.B.'s and on and on and.... Oh my broken heart...)
this has nothing to do with the subject but:
when placing doors and windows in ac10, you can see a water mark of their width !!!! very niiiiice ac10
(maybe always been there but this is my first time i see it )
when placing doors and windows in ac10, you can see a water mark of their width !!!! very niiiiice ac10
(maybe always been there but this is my first time i see it )
Trying to keep this thread alive. I can make this error happen every time.
Anybody else?
Even if I select a current composite wall and convert it to profile it immediately loses it's doors and windows... every time, all current AC10 library...
Anybody else?
Even if I select a current composite wall and convert it to profile it immediately loses it's doors and windows... every time, all current AC10 library...
