Installation & update
About program installation and update, hardware, operating systems, setup, etc.

Program issue when creating vectorial 3d

Anonymous
Not applicable
This Has began to bug me and the New Zealand tech people can't help either so please help me.

Right, the issue is that we are doing a vectorial 3d which is quite big (six accommodation buildings, 2 common buildings, 3 existing buildings) and none of my old computers could handle it (would lock whole system up after 6 or so hours).

Now I have a HP 3.06 desk top computer with 1gig ram and scuzzy hard drive and a massive grpghics card(can't remember that one) and it now only takes 20minutes somethimes!!! Only one out of four times it would create the 3d and when I reset the computer it comes right again.

When it was doing the 3d and it errors (as such) it stops creating the 3d and creates this file called Archicad.rpt. Now in it it has come up with the below.

ERROR IN ARCHICAD V8.0


NetBIOS name: CAD7
User name : user7
Account name: user7
Domain name : CAD7

Program Version: 8.0.0 R3 (6344)
WibuData: 1861 398085 551988
OS Version : Windows NT 5.1.2600 Service Pack 1
System time: 2004/5/26 1:16:5

Fatal memory error in BMReallocHandle. Requested memory size is 161568000 bytes

Call stack:
0x5F10416E!GSRoot.DLL (0x5F104160 + 14 bytes) (BugRep_ReportError + 14 bytes)
0x5F10A954!GSRoot.DLL (0x5F10A880 + 212 bytes) (GS::DeleteArrayOperator + 5652 bytes)
0x5F10A9E3!GSRoot.DLL (0x5F10A9A0 + 67 bytes) (GS::DeleteArrayOperator + 5795 bytes)
0x5F10A175!GSRoot.DLL (GS::DeleteArrayOperator + 3637 bytes)
0x5F00E46F!GSUtils.DLL (0x5F00E400 + 111 bytes) (VMSpac + 1439 bytes)
0x5F00E3D7!GSUtils.DLL (0x5F00DED0 + 1287 bytes) (VMSpac + 1287 bytes)
0x5F2EB1BB!GSModeler.DLL (0x5F31B1A0 + -196581 bytes) (HLstHTMPI + 27 bytes)
0x5F31849F!GSModeler.DLL (VSSumShadows + 6591 bytes)
0x5F52B61F!Geometry.DLL (PGPolyMakeRegular + 1695 bytes)
0x5F530F3C!Geometry.DLL (0x5F530B90 + 940 bytes) (PG3DSplitPoly + 16684 bytes)
0x5F52FDDC!Geometry.DLL (0x5F52FBB0 + 556 bytes) (PG3DSplitPoly + 12236 bytes)
0x5F52FB8A!Geometry.DLL (0x5F53FAD0 + -65350 bytes) (PG3DSplitPoly + 11642 bytes)
0x5F543072!Geometry.DLL (0x5F532C30 + 66626 bytes) (Geometry::PGXPolyUnionExt + 1090 bytes)
0x5F537C65!Geometry.DLL (0x5F527C30 + 65589 bytes) (Geometry::PGPolyUnionExt + 53 bytes)
0x5F52BEE0!Geometry.DLL (0x5F52BBC0 + 800 bytes) (PGPolyUnion + 800 bytes)
0x5F316BFD!GSModeler.DLL (0x5F316AE0 + 285 bytes) (VSSumShadows + 285 bytes)
0x5F316007!GSModeler.DLL (0x5F315660 + 2471 bytes) (VSOnePlaneShadows + 3607 bytes)
0x5F3150A8!GSModeler.DLL (0x5F2D4F10 + 262552 bytes) (VSShadowLines + 408 bytes)
0x5F2CEBD2!GSModeler.DLL (0x5F2CEA20 + 434 bytes) (G3Redraw0 + 434 bytes)
0x00989200!ArchiCAD.exe (0x008B9080 + 852352 bytes)
0x008B3900!ArchiCAD.exe (0x008B3730 + 464 bytes)
0x008B3B09!ArchiCAD.exe (0x00877BF0 + 245529 bytes)
0x00877F38!ArchiCAD.exe (0x00877DE0 + 344 bytes)
0x00877DCB!ArchiCAD.exe (0x0096AC00 + -994869 bytes)
0x00969569!ArchiCAD.exe (0x009694A0 + 201 bytes)
0x0096A750!ArchiCAD.exe (0x0096A570 + 480 bytes)
0x0096ABA1!ArchiCAD.exe (0x0078AAE0 + 1966273 bytes)
0x0078D4B3!ArchiCAD.exe (0x00CAD300 + -5373517 bytes)
0x00CAA3F4!ArchiCAD.exe (0x00CAA250 + 420 bytes)
0x00CA63FC!ArchiCAD.exe
0x77E814C7!kernel32.dll (GetCurrentDirectoryW + 68 bytes)



ERROR IN ARCHICAD V8.0


NetBIOS name: CAD7
User name : user7
Account name: user7
Domain name : CAD7

Program Version: 8.0.0 R3 (6344)
WibuData: 1861 398085 551988
OS Version : Windows NT 5.1.2600 Service Pack 1
System time: 2004/5/26 2:52:20

Fatal memory error in BMReallocHandle. Requested memory size is 252480000 bytes

Call stack:
0x5F10416E!GSRoot.DLL (0x5F104160 + 14 bytes) (BugRep_ReportError + 14 bytes)
0x5F10A954!GSRoot.DLL (0x5F10A880 + 212 bytes) (GS::DeleteArrayOperator + 5652 bytes)
0x5F10A9E3!GSRoot.DLL (0x5F10A9A0 + 67 bytes) (GS::DeleteArrayOperator + 5795 bytes)
0x5F10A175!GSRoot.DLL (GS::DeleteArrayOperator + 3637 bytes)
0x5F00E46F!GSUtils.DLL (0x5F00E400 + 111 bytes) (VMSpac + 1439 bytes)
0x5F00E3D7!GSUtils.DLL (0x5F00DED0 + 1287 bytes) (VMSpac + 1287 bytes)
0x5F2EB1BB!GSModeler.DLL (0x5F31B1A0 + -196581 bytes) (HLstHTMPI + 27 bytes)
0x5F31849F!GSModeler.DLL (VSSumShadows + 6591 bytes)
0x5F52B61F!Geometry.DLL (PGPolyMakeRegular + 1695 bytes)
0x5F530F3C!Geometry.DLL (0x5F530B90 + 940 bytes) (PG3DSplitPoly + 16684 bytes)
0x5F52FF1E!Geometry.DLL (0x5F52FBB0 + 878 bytes) (PG3DSplitPoly + 12558 bytes)
0x5F52FB8A!Geometry.DLL (0x5F53FAD0 + -65350 bytes) (PG3DSplitPoly + 11642 bytes)
0x5F543072!Geometry.DLL (0x5F532C30 + 66626 bytes) (Geometry::PGXPolyUnionExt + 1090 bytes)
0x5F537C65!Geometry.DLL (0x5F527C30 + 65589 bytes) (Geometry::PGPolyUnionExt + 53 bytes)
0x5F52BEE0!Geometry.DLL (0x5F52BBC0 + 800 bytes) (PGPolyUnion + 800 bytes)
0x5F316BFD!GSModeler.DLL (0x5F316AE0 + 285 bytes) (VSSumShadows + 285 bytes)
0x5F316007!GSModeler.DLL (0x5F315660 + 2471 bytes) (VSOnePlaneShadows + 3607 bytes)
0x5F3150A8!GSModeler.DLL (0x5F2D4F10 + 262552 bytes) (VSShadowLines + 408 bytes)
0x5F2CEBD2!GSModeler.DLL (0x5F2CEA20 + 434 bytes) (G3Redraw0 + 434 bytes)
0x00989200!ArchiCAD.exe (0x008B9080 + 852352 bytes)
0x008B3900!ArchiCAD.exe (0x008B3730 + 464 bytes)
0x008B3B09!ArchiCAD.exe (0x00877BF0 + 245529 bytes)
0x00877F38!ArchiCAD.exe (0x00877DE0 + 344 bytes)
0x00877DCB!ArchiCAD.exe (0x0087DB50 + -23941 bytes)
0x0087AFAE!ArchiCAD.exe (0x0096AC00 + -982098 bytes)
0x00969569!ArchiCAD.exe (0x009694A0 + 201 bytes)
0x0096A750!ArchiCAD.exe (0x0096A570 + 480 bytes)
0x0096ABA1!ArchiCAD.exe (0x0078AAE0 + 1966273 bytes)
0x0078D4B3!ArchiCAD.exe (0x00CAD300 + -5373517 bytes)
0x00CAA3F4!ArchiCAD.exe (0x00CAA250 + 420 bytes)
0x00CA63FC!ArchiCAD.exe
0x77E814C7!kernel32.dll (GetCurrentDirectoryW + 68 bytes)



Then I thought I should upgrade to the latest version (just incase and it came up with

LATEST ERROR IN ARCHICAD V8.1


NetBIOS name: CAD7
User name : user7
Account name: user7
Domain name : CAD7

Program Version: 8.1.0 R1 (1410)
WibuData: 1861 398085 551988
OS Version : Windows NT 5.1.2600 Service Pack 1
System time: 2004/5/31 20:55:50

Fatal memory error in BMReallocHandle. Requested memory size is 524288000 bytes

Call stack:
0x5F10417E!GSRoot.DLL (0x5F104170 + 14 bytes) (BugRep_ReportError + 14 bytes)
0x5F10AB04!GSRoot.DLL (0x5F10AA30 + 212 bytes) (GS::DeleteOperator + 5652 bytes)
0x5F10AB93!GSRoot.DLL (0x5F10AB50 + 67 bytes) (GS::DeleteOperator + 5795 bytes)
0x5F10A325!GSRoot.DLL (GS::DeleteOperator + 3637 bytes)
0x5F0078A6!GSUtils.DLL (0x5F007720 + 390 bytes) (VMSpac + 390 bytes)
0x5F3192EB!GSModeler.DLL (0x5F3492D0 + -196581 bytes) (HLstHTMPI + 27 bytes)
0x5F3499FF!GSModeler.DLL (VSOnePlaneShadows + 14335 bytes)
0x5F52BA9F!Geometry.DLL (PGPolyMakeRegular + 1695 bytes)
0x5F531266!Geometry.DLL (0x5F530EC0 + 934 bytes) (PG3DSplitPoly + 16310 bytes)
0x5F530356!Geometry.DLL (0x5F530130 + 550 bytes) (PG3DSplitPoly + 12454 bytes)
0x5F53011B!Geometry.DLL (0x5F5400A0 + -65413 bytes) (PG3DSplitPoly + 11883 bytes)
0x5F5444C2!Geometry.DLL (0x5F534070 + 66642 bytes) (Geometry::PGXPolyUnionExt + 1106 bytes)
0x5F537D65!Geometry.DLL (0x5F527D30 + 65589 bytes) (Geometry::PGPolyUnionExt + 53 bytes)
0x5F52C360!Geometry.DLL (0x5F52C040 + 800 bytes) (PGPolyUnion + 800 bytes)
0x5F3480DD!GSModeler.DLL (0x5F347FC0 + 285 bytes) (VSOnePlaneShadows + 7901 bytes)
0x5F347486!GSModeler.DLL (0x5F346AC0 + 2502 bytes) (VSOnePlaneShadows + 4742 bytes)
0x5F3460B9!GSModeler.DLL (0x5F2F5F20 + 328089 bytes) (VSShadowLines + 409 bytes)
0x5F2FC682!GSModeler.DLL (0x5F2FC4D0 + 434 bytes) (G3Redraw0 + 434 bytes)
0x009CB960!ArchiCAD.exe (0x008EB7E0 + 917888 bytes)
0x008EC8E5!ArchiCAD.exe (0x008EC720 + 453 bytes)
0x008ECAD9!ArchiCAD.exe (0x008ABFF0 + 264937 bytes)
0x008AC3D1!ArchiCAD.exe (0x008AC270 + 353 bytes)
0x008AC25B!ArchiCAD.exe (0x008B2D90 + -27445 bytes)
0x008AF8D3!ArchiCAD.exe (0x009AF4E0 + -1047565 bytes)
0x009ABD06!ArchiCAD.exe (0x009ABC40 + 198 bytes)
0x009ACF73!ArchiCAD.exe (0x009ACDA0 + 467 bytes)
0x009AD3DF!ArchiCAD.exe (0x007BD310 + 2031823 bytes)
0x007C472C!ArchiCAD.exe (0x00CF4570 + -5439044 bytes)
0x00CF1AA7!ArchiCAD.exe (0x00CF1900 + 423 bytes)
0x00CECCAC!ArchiCAD.exe
0x77E814C7!kernel32.dll (GetCurrentDirectoryW + 68 bytes)


//+=+=+=+=+=+=+=+=+ END REPORT +=+=+=+=+=+=+=+=+=+=+=+=+



It is writing this little error ever 5-8seconds which might be built in.

We have checked everything while running and the cpu speed only sits at about 20% and ram at 600. At first we thought it was running out of ram but it resets everytime we reset the 3d. All the bits are HP parts and no silly crap brands.

So sorry for the babble but someone might know.

Thanks
3 REPLIES 3
Eduardo Rolon
Moderator
First use the R2+ patch from last week and the updated libraries. Then open AC with new and reset and merge the old file and try again in order to verify that nothing has corrupted. Also you might try to verify if you have the latest graphic card drivers. Another option might be your virtual memory size it should normally be 3x the amount of RAM in the machine.
Eduardo Rolón AIA NCARB
AC27 US/INT -> AC08

Macbook Pro M1 Max 64GB ram, OS X 10.XX latest
another Moderator

Anonymous
Not applicable
Hey thanks for that.

Viryual memory = x4 (therefore 4 Gig virtual memory!!)

R2 hasn't been released here in NZ at the mo so I'm waiting on that.

The whole computer has all the latest updates for drivers etc.

Could the program not like error correcting memory??
Eduardo Rolon
Moderator
Re-reading your post I noticed that there is a reference to AC8.0 R3. If you have 8.1 try to forward merge option to bring everything to 8.1 For the merge option tip you can do a search for "how to fix corrupt files" if memory serves that was the name of the thread.
Eduardo Rolón AIA NCARB
AC27 US/INT -> AC08

Macbook Pro M1 Max 64GB ram, OS X 10.XX latest
another Moderator