About Damijan G

Damijan G · 2024-03-06

In preparing Site plans and conceptual elevations we use Sea Level reference values on Elevation/Level Dimensions. A lot of time goes into changing the Measured value to Custom/Sea Level (4 clicks per item). Dimensions can be copied, already styled, ...

Damijan G · 2024-03-02

Considerable layouting time goes into carefully arranging Drawings on the Layouts. Then we decide to change the scale of the Drawing or to relink with a different View and the content of the frame gets diplaced, in most cases dissapears out of the fr...

Damijan G · 2023-11-30

Please add the ability to adjust Story Levels subsequently later during design process with keeping the elements linked or associated with in their present relative positions. Reasons: tidying up the project, better control of Floor Plan Cut Line set...

Damijan G · 2023-11-28

Please include the Location Settings set in the Survey Point settings in the Autotext Reference list or Project Info. Useful for displaying the set To Sea Level project origin on Titles or. Layouts, texts, etc. from one source - reduce errors of manu...

Damijan G · 2023-11-17

A substantial improvement to the Design Options tool would be an ability to include different Story Levels Settings in the option set i.e. story slabs at different levels - very useful in refurbishment projects where there are many solutions for leve...

Damijan G · 2024-02-12

Yes, as said these are all good ideas and workarrounds we use every time. And yes the problem is there is a lot of 2D drafting done along the way where this solution is not aplicable as a "one click" solution.

Damijan G · 2023-12-01

I still don't get it. If the cabinets are getting modelled with an offset because the storey levels are wrong, then I would fix the storey levels and model without the offset. I wouldn't be modelling elements allowing for an error with the storey set...

Damijan G · 2023-12-01

@Barry Kelly wrote:I would hate to adjust a storey height and then find all of my cabinets floating above the floor or buried in it.Barry, it is usually the other way arround. The "cabinets" get modelled with an offset to a storey (due to haste negli...

Damijan G · 2023-12-01

Thank you all for your comments, which are all known solutions to us. Of course these are all the workarounds we use to prepare the project for the permit or construction documentations phase, and of course some time is alloted for this preparation, ...

Damijan G · 2023-11-30

I agree with, and as experienced Archicad user am aware of, everything written. We could call it an error or just design freedom, which I think is the goal we are all striving towards (or wishing for) with new technology. Sometimes there is not enoug...

User Statistics

User activity

Ability to save Elevation/Level Dimension to show Sea or Reference levels values as a Favorite

Add a Drawing Frame Option - Fit Drawing to Frame

Ability to Change Story Levels Without Moving the Elements

Include Location Settings in Project Information or for Autotext Reference

Design Options - add Story Settings Options

Re: Ability to Change Story Levels Without Moving the Elements

Re: Ability to Change Story Levels Without Moving the Elements

Re: Ability to Change Story Levels Without Moving the Elements

Re: Ability to Change Story Levels Without Moving the Elements

Re: Ability to Change Story Levels Without Moving the Elements