I'm currently working on a simple project with a pair of houses
(semidetached) each containing a single stair from ground to first
floor. The floor levels of these house differ by 225mm. The stair that
is at 0 displays correctly with a break line on ...
I have been asked to try out a PC with a view to move from Mac to PC. So
far I have had vrey few problems working on new projects in 8.1, other
than hitting the wrong shortcut keys. My problems start when I open up
ArchiCAD 7 projects that have origi...
HI, Thanks for the update and your experiment. I have tried what you
have listed below and have replicated your results. It appears that you
cannot get the stair to display correctly when you have the stair set
below the home storey and you have a st...
Hi, See attached screenshot of how the Floor Plan Display Layouts are
configured and the stair in question highlighted in green. As you can
see the staircase is set as relevant storey being ground floor. Above
relevant storey is first floor. The stai...
Hi, I have checked that and it is associated with the Ground Floor. I
have also checked the storey below and nothing shows up on this floor.
The first floor plan will show the break line as detailed in the Stair
tool, it is only the ground floor that...
Current parameters for the stairs are as follows: Floor Plan Display:
Relevant Story (0. Ground Floor) with Break Mark: Visible-Hidden Break
Mark: Break Mark position - Custom Height 875mm. I have also tried the
break mark at Floor Plan Cut Height wi...
We have also experienced the same problem on both 10.2 and 10.3, we have
a fast 100baseT ethernet with Ggabit backbone and a Windows 2003 Server.
I agree that waiting for files to open makes plotmaker virtually
unusable. We are also currently testing...