cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 
Collaborate forum

Forum Posts

IFC Import into ARCHICAD from REVIT

Hi. I'm trying to import an IFC file authored in Revit 2016 into ArchiCAD 23 but it is not coming out correctly. Some elements are not showing fully while others are not being displayed in the correct stories. Could this be an issue with how it was e...

Anonymous by Not applicable
  • 479 Views
  • 1 replies
  • 0 likes

MEP quantification

Hello, We are using MEP modeler to design exterior plumbing and electrical networks. The latter are produced in particular with flexible sheaths. The problem is that unfortunately we cannot extract the quantities of these elements. We are using the M...

Anonymous by Not applicable
  • 2264 Views
  • 5 replies
  • 0 likes

Roof slope label

I created a roof slope label with autotext using: CONCAT ( STR ( TAN ( PITCH ) * 12, 0 ), "/12 - PITCH" ) which works except that for a low slope roof it will not show the fraction, IE 1/2"/12" is shown as 0"/12"

Anonymous by Not applicable
  • 885 Views
  • 3 replies
  • 0 likes

Resolved! Door schedule - Sliding door arrow in wrong direction

I've made a door schedule including sliding doors - for some reason the opening arrows are correct in the elevation, but not in plan. See screenshots, I've marked an example in red. All the arrows are automatically generated. Any advice here?

Anonymous by Not applicable
  • 768 Views
  • 1 replies
  • 0 likes

BIMcloud appears with a yellow icon

Hi, on the server when BIMcloud basic is installed the icon appears yellow (see attached image) The option to open BIMcloud Manager is greyed out. Through the browser I can access Manager and there are no warnings. We can access and work without prob...

Resolved! Window schedule showing doors and walls

I just made a window schedule, but for some reason the schedule contains not only the windows (as specified) but also doors and some walls. The only element I've specified in the settings is the windows. I've even tried to specifically make the sched...

Anonymous by Not applicable
  • 651 Views
  • 3 replies
  • 0 likes

Properties Mapping Openings

Hi everyone I have this issue. I received an IFC with ProvisionForVoids from MEP which i hotlinked into Archicad. In the IFC translator i did a Mapping from IFC Properties to Archicad Properties. So this works perfect. The ProvisionForVoids now have ...

Anonymous by Not applicable
  • 409 Views
  • 2 replies
  • 0 likes

AC10 converter

Hi, I have some old files I need to convert. I found the AC10 Converter, and downloaded it, but it won't run. All the discussions here are from 2017 or older, so I'm assuming this is a problem with newer operating systems and 32-bit compatibility. Do...